valutazioni - 2, GPA: 3.5
(
)
)
|
Facilità d'uso
See Fig 1.1 Step 2 Make sure all the printers are powered OFF, then connect one end of theprinter cable to the printer port of the Print Server and attach the other end of the cableto the printer port of the printer. Repeat this process for each printer on your network. Step 3 Turn ON the printer(s). Step 4 Plug one end of the power cord into the Print Server and the other end into anelectrical outlet. Fig. 1.1 Section 2 Section 2 Configuring Client IP Address Note: The default IP address of the Print Server is 192.168.1.254 with a subnet mask of 255.255.255.0 The Print Server must be on the same subnet as your network inorder for you to print through the Print Server. Follow the steps below to access thePrint Server’s Web Configuration Utility. If your network ID is already using the 192. 168.1.x segment, skip to Section 3, Accessing the Web Configuration Utility. For Windows 2000/XP Step 1 On one of the computers in yournetwork, right-click on My Network Placeson your desktop and right-click on Local Area Connection. Step 2 Select Internet Protocol (TCP/IP) and click Properties. See Fig. 2.1 Step 3 Write down your current networksettings including IP address, subnet mask, and default gateway on a piece ofpaper. You will need these information afteryou have set up the print server in Section 3. Fig. 2.1 Step 4 Select Use the following IP address and enter an IP address of 192.168. 1.x (where x is a number between 2 ~ 253 and is not currently assigned to any deviceon your network). Step 5 Enter 255.255.255.0 for the Subnet mask. Step 6 Enter the IP address of your Default gateway. See Fig. 2.2 Step 7 Click OK and OK again. Step 8 Go to Section 3, Accessing theWeb Configuration Utility. Fig. 2.2 For Windows 95/98/ME Step 1 Go to Start, Settings, Control Panel, and double-click the Network icon. Step 2 Select TCP/IP and click Properties. See Fig. 2.3 Step 3 Write down your current networksettings including IP Address and Subnet Mask on a piece of paper. You will needthese information after you have set up theprint server in Section 3. Fig. 2.3 Step 4 Select Specify an IP address and enter an IP address of 192.168.1.x (where x is a number between 2 ~ 253 and is not currently assigned to any device on yournetwork). Step 5 Enter 255.255.255.0 for the Subnet mask. See Fig. 2.4 Step 6 Click OK and OK again. Step 7 Restart the computer if you areprompted to do so. Step 8 Go to Section 3, Accessing theWeb Configuration Utility. Fig. 2.4 Section 3 Section 3 Accessing the Web Configuration Utility Step 1 Open the web browser and type thedefault IP address of the Print Server: 192. 168.1.254 See Fig. 3.1 Fig. 3.1 Step 2 The Welcome screen will appear. See Fig. 3.2 Fig. 3.2 Step 3 Click on Configuration. You may rename the Print Server name and Port names or leave them with the default. Step 4 Write down on a piece of paper thePort names you want to use. Be sure to click Save when you are done editing the names. See Fig. 3.3 Fig 3.3 Step 5 Click on TCP/IP Pro...
Questo manuale è adatto anche per i modelli :Apparecchiature di rete - APSUSB2 (1.15 mb)
Apparecchiature di rete - APSUSB2 (1.15 mb)
Apparecchiature di rete - APSUSB2 (1.15 mb)
Apparecchiature di rete - APSUSB2 (1.15 mb)