Produttore : Asus File Size : 444.39 kb File Nome : Lingua di insegnamento:

Vai a scaricare

INTERNET SECURITY ROUTER FAQ
On windows 2000 computer do the flowing：
1. In the Windows task bar, click the button, point to Settings, and then click Control Panel.
2. Double-click the Network and Dial-up Connections icon.
3. In the Network and Dial-up Connections window, right-click the Local Area Connection icon, and then
select Properties.
4. In the Local Area Connection Properties dialog box, select Internet Protocol (TCP/IP), and then click
button.
5. In the Internet Protocol (TCP/IP) Properties dialog box, click the radio button labeled Use the following
IP address and enter an IP address for your PC. Make sure that this IP address is in the same subnet as
that for the Internet Security Router LAN IP.
6. Enter the subnet mask. The value is the same as what is configured in the LAN IP configuration page on
the Internet Security Router.
7. Enter the Default Gateway IP address. This is the LAN IP of the Internet Security Router.
8. Enter IP addresses of the DNS servers provided by your ISP.
9. Click button twice to confirm and save your changes, and then close the Control Panel.

For example: LAN IP of your Internet Security Router is 192.168.1.1 and subnet mask is 255.255.255.0. You can
then set your PC’s IP address to192.168.1.10 and subnet mask to 255.255.255.0.
2.2 WAN
2.2.1 Why can’t my Internet Security Router get an IP from my ISP?
Go through the following steps to eliminate the causes of failing to obtain an IP address from your ISP.
1. Check if the Internet Security Router and/or the ADSL or cable modem is powered on. Turn on the power
if necessary.
2. Check if the WAN LED is in solid or flashing green. If the WAN LED is off, make sure that the Ethernet
cable connecting the Internet Security Router and your modem is firmly attached to the Ethernet
connectors on both devices.
3. Check if the LED indicating the connection between your ADSL or cable modem and your ISP is lit. If this
LED is off, that means the connection is down. You may have to call your ISP to find out why the
connection is down.
4. Open the WAN configuration page and click on the Apply button to re-establish the connection to your
ISP.
2.2.2 What is Dial-on-Demand and Keep Alive? Which one shall I use?
Dial-on-demand and keep alive options are available only when the WAN connection mode is set to PPPoE. Dial-
on-demand can terminate and resume traffic at the PPPoE interface based on the data inactivity timeout period
configured for the interface, without any user intervention. It terminates a PPPoE session after the lapse of the
inactivity timeout period and automatically re-establishes a PPPoE session after traffic resumes. This option is
useful when your broadband service charge is based on the amount of time connected because the Internet
Security Router will maintain connection only when there is traffic. Note that the update interval setting for the
Internet time server must be greater than the inactivity timeout period configured for the dial-on-demand.
Keep alive can keep your service connected even when there is no traffic. This option will provide
2.2.3 MAC Cloning
2.2.3.1 What is MAC address?
The unique hardware address programmed into the Ethernet and Token Ring adapters that identify a network
card from all others.
Copyright 2003-2004, ASUSTeK Computer, Inc.

Page 3

---

...

Questo manuale è adatto anche per i modelli :
Apparecchiature di rete - SL500 (444.39 kb)

Scarica la tua

Per scaricare, digitare 2 cifre :