Log:
valutazioni - 2, GPA: 4.5 ( )

Istruzioni per l'uso Black Box, Modello 202

Produttore : Black Box
File Size : 240 kb
File Nome : 16407c.pdf
Lingua di insegnamento: en
Vai a scaricare



Facilità d'uso


Black Box Corporation. Modem 202 and Modem 202T Reliable old favorites, manufactur Reliable old favorites, manufacturReliable old favorites, manufactured eded to toto today’ today’today’s ss exacting specifications. exacting specifications.exacting specifications. An industrial application for the Modem 202. FEATURES • Compatible with the Bell 202T standard. • Operate over 2- or 4-wire voice-grade leased or private lines. • For point-to-point or point-to-multipoint polling networks. • Prevent data and carrier-detect errors over noisy lines. • Anti-streaming capability. • Choose between AC- and DC-powered Modem 202T models. Modem 202 (RTU) OVERVIEW Back in the day, Bell 202 was the top-speed modem standard, boasting 1200-bps rates that were four times faster than the poky Bell 108 standard. Still widely used in many industries, Bell 202 modems like our Modem 202 or Modem 202T keep data moving along. Order one of these modems to expand an existing industrial, System Control and Data Acquisition (SCADA), or metering application, or to replace an old UDS/Motorola® 202T Modem. In fact, the Modem 202T is a pin-for-pin, form, fit, and function replacement for that tried-and-true modem. Just think what it can do for your legacy system! The Modem 202 (MD845A-R2) and the Modem 202T (MD1970A, MD1970A-DC) function the same way. However, the Modem 202 supports speeds up to 1200 bps over unconditioned lines; the Modem 202T supports speeds up to 1800 bps over conditioned lines. Widely installed and a prerequisite for many leased-line applications, both the Modem 202 and the Modem 202T support voice-band frequency shift keyed (FSK) modulation within asynchronous point-to-point or multipoint systems that use voice-grade 2-wire, half-duplex or 4-wire, full duplex dedicated or leased lines. These can be loaded or unloaded circuits, equal to or better than the ITU (formerly CCITT) M.1020/1025 or Bell 3002 leased lines. These modems have many uses. You can use a Modem 202 or Modem 202T with remote terminal units (RTUs) and programmable logic controllers (PLCs) to control and monitor a large number of remote devices—traffic control lights, for instance. In addition to SCADA applications, the modems are quite useful for Programmable logic controller Water tank Water tank Water tank Remote telemetry unit Remote telemetry unit Remote telemetry unit (MD845A-R2) Modem 202 (MD845A-R2) Modem 202 (MD845A-R2) RS-232 cable Dedicated wire pair(s) Dedicated wire pair(s) RS-232 cable RS-232 cableRS-232 cable (RTU) (RTU) temperature and pressure controllers in numerous industries, particularly those in which you expect to add automated devices. The water-treatment industry prefers the Modem 202 because it’s compatible with battery systems from 11 to 18 VDC. The Modem 202 is also relied upon heavily by the U.S. Government for daily commerce. Noisy lines aren’t a problem either. The Modem 202 and the Modem 202T have circuitry that prevents data errors that occur on such lines, particularly those within multidrop systems where carrier turn-offs and other modems on the same line can cause noise spikes and other harmful high frequencies. The modems combine soft-carrier generation and soft-carrier detection as well as a signal-noise-ratio (SNR) detector to eliminate such line-noise errors. The modems also have antistreaming features, which prevent them from remaining in Transmit Mode when they’re not actively transmitting data. Great for multipoint applications, antistreaming prevents a malfunctioning slave modem from occupying the line indefinitely. When anti- streaming is active, the Modem 202 or Modem 202T can only transmit data for up to 56 seconds. Then, they automatically turn off their transmitter and look for an ON-to-OFF transition of Request To Send (RTS) before proceeding with normal operation. Modem 202T offers diagnostic testing features. For testing purposes, the Modem 202T has a five-position rotary switch on its front panel for running analog and digital loopbacks as well as self-tests. To verify the transmitter and receiver of the local modem and its connection to a local DTE, 724-746-5500 blackbox.com 2of 3 #16407 3 of 3 8/22/2007 #16407 724-746-5500 blackbox.com generate a data pattern from the locally attached DTE or have the modem generate a test pattern. You can also run line and modem tests to verify the integrity of the line between the local and remote modems. With this test, the local Modem 202T loops back received data to the transmitter and sends the data to the remote modem. These characters can be done by using a modem test pattern or by originating a data pattern from the local DTE. Configuration is simple! To configure the Modem 202T, just set a few DIP switches. These jumper settings control operating characteristics such as the dynamic range of the modem receiver, the transmit level, and the call turnaround squelch (which guards against echoes from already-completed transmissions). By default, the Modem 202T’s DIP ...

Questo manuale è adatto anche per i modelli :
Apparecchiature di rete - 202T (240 kb)

Scrivi la tua opinione del dispositivo



Il messaggio
Il tuo nome :
Inserire le due cifre :
capcha





categorie