valutazioni - 0, GPA: 0
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Apparecchiature di rete - HP-UX 11i v3 I/O Cards (121.67 kb)
Apparecchiature di rete - HP-UX 11i v3 I/O Cards (276.65 kb)
Facilità d'uso
Install HP Fabric Clustering System Software
This section describes the steps necessary to install HP Fabric Clustering System software. The
same software version must be installed on each instance of the HP-UX operating system in the
fabric.
1.
Log on to the system as root.
2.
Insert the software media into the appropriate drive. If the software is being loaded from a
CD-ROM, go to step 3; otherwise, go to step 4. The software can also be located at
http://www.software.hp.com.
Locating the AH304A HCA Software on software.hp.com
The drivers, utilities and manpages
for the AH304A HCA are on the HP-UX application release CD. They are also available at
the HP Software Depot. To locate the software at the HP Software Depot:
•
Go to http://www.software.hp.com
•
Search for "AH304A"
•
Click on "receive for free"
•
Fill out the free product registration form and click on "next"
•
Look for "Download Software" and click on the depot that corresponds to your HP-UX
operating system version to download the drivers, utilities, and manpages for the
AH304A adapter.
•
In the "Documents" column next to the "Download Software" column, click on
"Installation Instructions" to download instructions for using the Software Distributor
tool to install the drivers, utilities, and manpages for the AH304A adapter.
3.
Mount the CD-ROM drive by using the following command at the command prompt:
$ mount device_name
where device_name is the name assigned to the CD-ROM drive.
4.
Run the swinstall program using the following command:
$ /usr/sbin/swinstall
This opens the Software Selection window.
5.
Change the Source Host Name, if necessary, and then enter the mount point of the drive in
the Source Depot Path field. Select the OK button to return to the Software Selection window.
6.
The Software Selection window now contains a list of available software to install.
7.
Highlight the HP Fabric for InfiniBand software and choose Mark for Install from the Actions
menu; this chooses the highlighted software.
You can also install the IPoIB software at this time as it is part of this same bundle to enable
it to be functional. It can also be installed later if you choose to not install it now.
8.
From the Actions menu, select the Install... menu, and then choose Install. This begins
product installation and opens the Install Analysis window.
9.
Select the OK button in the Install Analysis window when the Status field displays a Ready
message.
10. Select the YES button in the Confirmation window to start software installation.
swinstall loads the fileset, runs the control script for the filesets, and builds the kernel.
When the processing is finished, the Status field displays a Ready message. Select Done
and then the Note window opens.
11. Select the OK button in the Note window to reboot. The user interface disappears and the
system reboots.
When the system comes back up, log on to the system as root and view the
/var/adm/sw/swagent.log and /var/adm/sw/swinstall.log files to view error or
warning messages that may have occurred during the installation.
10
HP PCIe 2-port 4X DDR Fabric Adapter Installation
...