® Note: If you have a diskless unit, you must install at least one disk before following 7. Accept the certificate. these instructions. For a list of supported disks, see the Hardware Compatibility List Installation Guide A login prompt displays. at http://readynas.com/hcl. For information about installing disks, see the hardware manual for your unit. 8. Enter admin for the user name and password for the password and click the OK button. To set up your unit: A configuration wizard displays. You must change the administrator’s password ReadyNAS® RAIDiator 5.3 1. Place the unit in a location that provides adequate ventilation. during the inital configuration process. Package Contents High capacity disks can produce considerable heat. It is important to ensure You might want to write your new password here: that the fan exhausts are unobstructed. Thank you for purchasing this NETGEAR product. 2. Connect the power adapter to the back of the unit and plug the other end into a wall outlet or power strip. You need the following items If you write your password here, be sure to keep this guide in a safe place. from your package to set up 3. Use an Ethernet cable to connect the LAN1 Ethernet port on the ReadyNAS to 9. Follow the wizard’s prompts to complete the initial configuration. your ReadyNAS® unit. your network. To recover a lost password: 1. ReadyNAS unit 4. If necessary, press the Power button to turn the unit on. 2. Resource CD It takes about a minute to start up. The IP address is retrieved using DHCP. If you lose your password, you can recover it using the password recovery question 3. Power adapter you provided during initial setup. 5. Install and run the RAIDar utility on a computer that is connected the same 4. Ethernet cable local area network (LAN) as your ReadyNAS unit. 1. Using your browser, visit https:///password_recovery. For more information about 2 RAIDar is located on the Resource CD that came with your unit. It includes Replace with the IP address of your ReadyNAS unit. setting up, configuring, and versions for the Windows, Mac, and Linux operating systems. It is also available 2. Answer your password recovery question. using your system, see the at http://readynas.com/start. A new password is mailed to the email address you provided. appropriate software and 1 RAIDar automatically detects your ReadyNAS unit on the network. hardware manuals for your unit. Links to these manuals Technical Support are included on the Resource CD that came with your unit 3 After installing your device, locate the serial number on the label of your product and and are also available at use it to register your product at http://www.NETGEAR.com/register. Registration is http://readynas.com/ required before you can use the telephone support service. NETGEAR strongly documentation. recommends using this website to register your product. 4 For product updates and web support, visit http://readynas.com. Basic Setup For complete DoC, visit the NETGEAR EU Declarations of Conformity website at http://support.netgear.com/app/answers/detail/a_id/11621/. Follow these instructions to begin using your ReadyNAS unit. These instructions assume that the unit is using the factory default X-RAID2 For GNU General Public License (GPL) related information, visit TM disk configuration and that at least one disk is installed. http://support.netgear.com/app/answers/detail/a_id/2649. This symbol was placed in accordance with the European Union Directive 2002/96 on the Waste Electrical and Electronic Equipment (the WEEE Directive). If disposed of within the European Union, 6. Click the Setup button. this product should be treated and recycled in accordance with the laws of your jurisdiction implementing the WEEE Directive. An SSL certificate security warning displays. This is used to ensure an encrypted authentication and management session to the ReadyNAS and will