valutazioni - 0, GPA: 0
(
)
)
|
Foto e specifiche BenQ SL461A |
Facilità d'uso
4. For more schedule settings, press [EXIT] button and then
LANGUAGE
repeat the steps above. A check mark in the box next to
Select the language used in the OSD menu.
the number of the schedule item indicates that the selected
schedule is in effect.
The options are: {ENGLISH} / {FRANÇAIS} / {ESPAÑOL} / {中文}
/ {繁體中文} / {PORTUGUÊS}.
NOTES:
OSD TURN OFF
• The {EVERY DAY} selection in a schedule item takes
priority over the other weekly schedules.
Set the period of time the OSD menu stays on the screen.
• If the schedule overlap, the scheduled power-on time takes
The options are: {5 ~ 120} seconds.
priority over scheduled power-off time.
OSD H POSITION
• If there are two schedule items programmed for the same
Adjust the horizontal position of the OSD menu.
time, the highest numbered schedule takes priority. For
example, if schedule items #1 and #2 both set the display to
OSD V POSITION
power on at 7:00 AM and off at 5:00 PM, then only schedule
Adjust the vertical position of the OSD menu.
item # 1 will take effect.
INFORMATION OSD
DATE AND TIME
Set the period of time the information OSD displayed on the
Adjust the current date and time for the display’s internal clock.
upper right corner of the screen. The information OSD will
display when input signal is changed.
DATE AND TIME
The information OSD will remain on the screen with {OFF}
selection.
YEAR
2011
The options are: {OFF, 3 SEC. ~ 10 SEC.}.
MONTH
08
DAY
04
MONITOR INFORMATION
HOUR
20
Displays the information about your display, including MODEL
MINUTE
20
NAME and SERIAL.
DAYLIGHT SAVING TIME
OFF
MONITOR ID
CURRENT DATE TIME
Set the ID number for controlling the display via the RS232C
2011 . 08 . 04
00 : 18 : 10
connection. Each display must have a unique ID number when
multiple sets of this display are connected.
:SEL
+-:ADJ
EXIT :RETURN
MENU :EXIT MENU
IR CONTROL
Select the operation mode of the remote control unit when
1. Press [SET] button to enter the submenu.
multiple displays are connected via the RS232C connection.
2. Press [ ] or [ ] button to toggle among the {YEAR},
• {NORMAL} - All displays can be operated normally by the
{MONTH}, {DAY}, {HOUR}, {MINUTE}, and {DAYLIGHT
remote control.
SAVING TIME} settings.
• {LOCK} - Lock the remote control function of this display. To
3. Press [ ] or [ ] button to adjust all settings except
unlock, press and hold the [DISPLAY] button on the remote
{DAYLIGHT SAVING TIME}.
control for 5 (five) seconds.
CONFIGURATION1 RESET
TILING
Reset all settings in the CONFIGURATION1 menu to factory
With this function you can create a single large-screen matrix
preset values.
(video wall) that consists of up to 25 sets of this display (up to
5-set each at the vertical and horizontal side). This function
4.2.6. CONFIGURATION2 menu
requires a daisy-chain connection.
With an additional splitter usage, you can create a single large-
screen matrix (video wall) that consists of up to 100 sets of this
CONFIGURATION2
display (up to 10-set each at the vertical and horizontal side).
LANGUAGE
OFF
OSD TURN OFF
45
OSD H POSITION
50
TILING
OSD V POSITION
50
INFORMATION OSD
3 SEC.
H MONITORS
1
PIP
MONITOR INFORMATION
MONITOR ID
1
V MONITORS
1
1
IR CONTROL
POSITION
1
TILING
2
POWER ON DELAY
OFF
FRAME COMP.
OFF
CLOSED CAPTION
ENABLE
CONFIGURATION2 RESET
OFF
:SEL
+-:ADJ
EXIT :RETURN
MENU :EXIT MENU
3
:SEL
SET :NEXT
EXIT :RETURN
MENU :EXIT MENU
18
...