Produttore : BenQ File Size : 2.81 mb File Nome : Lingua di insegnamento:

Vai a scaricare

Tools needed for installation
E. Remove the flat head screws (M3xL8) (C) with a
!
Philips screwdriver and pull open the cover to the
left and right.
Note: Prevent the cover from falling off when the
screws have been turned loose.
C
C
1. Power drill 2. Drill head 3. Hammer 4. Wrench
5.Allen wrench 6.Philips screwdriver
7. Pencil
12mm
5mm/6mm



Installation steps
Flat head screw
(M3xL8) x 8
1. Secure bracket to a wall
Please identif
A.
y the type of the target wall: Concrete or
F. Remove the flat head screws (M4xL10) (D) with a
wood.
2.
Philips screwdriver before removing the display
Note: DO NOT secure the bracket to any decorative
frame pad (G) and cut the cable tie with scissors.
post or plasterboard for wood walls.
B. Please drill holes of diameter 10mm and depth 55mm
Note: Hold the display frame (G) after the cable tie is
in concrete walls with power drill at locations you
cut or it may fall.
have marked earlier.
Note: Please select screws according to the type of
10
Ø
D
the wall. The expansion screws (B) that come
!
with your product are designed for cement walls
only.
Screws for wood wall installation shall feature
G
adequate strength and be validated by qualified
55
technicians.
Flat head screw
Cement walls
(M4xL10)x6
A
228
C. Hammer the expansion screws (M8xL60) (B) in the
F
holes drilled earlier and tighten their nuts.
B
B
Spring washer
394
260
Nut
G
1.
Expansion screw
D
(M8xL60)x6
394
220
4~7
D. Remove the flat head screws (M3xL8) (C) with a Philips
G. Remove the display’s outer frame (G).
screwdriver before pulling open the cover upwards
to the left and right.
C
C
G
Flat head screw
(M3xL8) x 18

---

...

Questo manuale è adatto anche per i modelli :
Apparecchiature di rete - DL550D (2.81 mb)

Scarica la tua

Per scaricare, digitare 2 cifre :