valutazioni - 0, GPA: 5
(
)
)
|
Facilità d'uso
15. Choose Print, the LED on IR100M+/IR100MP will be on and printer begin to print out. Or the parallel LED on the top of IR100M will flash and printer beginning to print out. If not, see Trouble Shooting. TROUBLE SHOOTING AND COMPATIBLE PRINTERS LIST For help on general and miscellaneous problems you may be experiencing with your printing, refer to the following pages for possible solutions. Look up your problem and try the solution. Note: Please Check your printer is on the IR-100M+/IR100M/IR100MP compatibility list first. If not, contact Actisys technical support. ACT-IR100MP Trouble Shooting Table Problem Solution When I try to print from my mobile device, the LED is not on. Be sure your mobile device’s infrared port is activated. Be sure the IR100MP’s eye is aligned well with your mobile eye. Be sure there is no obstruction between two eyes. Be sure the distance between two eyes met the infrared requirements. When I try to print from my mobile device, the LED flashes or on, but nothing prints out or the printout is not readable. Check if your printing software is on the Actisys recommend software list. If not, contact Actisys technical support. Be sure the printing port is set to infrared. Be sure the printer settings are correct. ACT-IR100M+ Trouble Shooting Table Problem Solution When I try to print from my desktop PC, nothing prints out (pass through). Be sure AC adapter has firmly connected to IR100M+. Be sure the cable between your desktop and IR100M is firmly connected. Be sure IR100M+ is firmly attached to printer. Be sure your PC printing set to parallel port. Be sure your printer power is ON. Be sure your printer settings are correct. When I try to print from my mobile device, the LED is not on. Be sure AC adapter has firmly connected to IR100M+. Be sure your mobile device’s infrared port is activated. Be sure the IR100M’s eye is aligned well with your mobile eye. Be sure there is no obstruction between two eyes. Be sure the distance between two eyes meet the infrared requirements. When I try to print from my mobile device, the LED flashes or on, but nothing prints out or the printout is not readable. Check if your printing software is on the Actisys recommend software list. If not, contact Actisys technical support. Be sure the printing port is set to infrared. Be sure the printer settings are correct. ACT-IR100M Trouble Shooting Table IF your IR100M version is v2.2 or below, you MUST follow the power sequence. Problem Solution The power LED is not on. 1 Be sure there is 110V AC power supply to your wall outlet. 2 Be sure AC adapter is firmly plugged in the wall outlet. 3 Be sure AC adapter’s output is 7.5V ~ 12V inside positive. 4 Be sure AC adapter is firmly attached to IR100M. When I try to print from my desktop PC, the parallel port LED does not flash or on at all, nothing prints out 1 Be sure the cable between your desktop and IR100M is firmly connected. 2 Be sure IR100M is firmly attached to printer. 3 Be sure your PC printing set to parallel port. When I try to print from my desktop PC, the parallel port LED flashes or on, but nothing prints out or the printout is not readable. 1 Be sure your printer power is ON. 2 Be sure your printer settings are correct. When I try to print from my mobile device, the infrared port LED does not flash at all. 1 Be sure your mobile device’s infrared port is activated. 2 Be sure the IR100M’s eye is aligned well with your mobile eye. 3 Be sure there is no obstruction between two eyes. 4 Be sure the distance between two eyes meet the infrared requirements. When I try to print from my mobile device, the infrared port LED flashes, but nothing prints out or the printout is not readable. 1 Check if your printing software is on the Actisys recommend software list. If not, contact Actisys technical support. 2 Be sure the printing port is set to infrared. 3 Be sure there is no conflict between the infrared and other devices. 4 Be sure the printer settings are correct. If the problems exist, please contact ACTiSYS technical support. SPECIFICATIONS Model: ACT-IR100M+/100M/100MP Carrier: Infrared radiation (peak wavelength: 850 to 1050 nm) IrDA SIR Transmission Speed: 9.6, 19.2, 38.4, 57.6, 115.2K bps Parity Bit: None Data: 8 bit Stop Bit: 1 bit Error Check: CRC Parallel Interface: Centronics 36F/36M Cable to Parallel Printer. DB 25M/Centronics 36M Cable to PC Parallel Port. Power Consumption: 0.30W During Printing Operating Temperature: 0oC to 40oC (32oF to 104oF) IR100M+ IR100M IR100MP Dimension 2.68” (W) x 3.15” (L) x 1” (H) (68mmW x 80mmL x 25mmH) Cable (IR220L+)5’11” (180cm) 2.36” (W) x 3.94” (L) x 0.79” (H) (60mmW x 100mmL x 20mmH) 2.68” (W) x 3.15” (L) x 1” (H) (68mmW x 80mmL x 25mmH) Weight 6.8 oz (193 gr.) (Printer Adaptor Only) 6.9 oz (197 gr.) (Printer Adaptor Only) 6.6 oz (188 gr.) (Printer Adaptor Only) Serial Interface DB9 Male Connector on IR100MB DB9 Female Connector on IR220L+ Power Source AC 120V 50/60Hz with AC adapter. 7.5V DC, 300mA (AC adapter...
Questo manuale è adatto anche per i modelli :Apparecchiature di rete - ACT-100MP (1.23 mb)
Apparecchiature di rete - ACT-IR100M+ (1.23 mb)