valutazioni - 0, GPA: 4
(
)
)
|
Facilità d'uso
• If the printer attached to the LevelOne Broadband Router is changed, just run this program again, and select the correct printer. • To delete a port created by this setup program, use the Windows Delete Port facility: • Right-click any printer in the Printers folder, and select Properties. • Locate the Delete Port button. This button is on the Details or Ports tab, depending on your version or Windows. • If the LevelOne Broadband Router's IP Address is changed, and you can no longer print, delete the port (see procedure above) and re-install it. Port Options The options for the Print Port Driver are accessed via the Windows Port Settings button. Use Start - Settings -Printers to open the Printers folder, then right-click the Printer, and select Properties. The Port Settings button is on the Details or Port tab, depending on your version of Windows. An example screen is shown below: PC Configuration Figure 27: Print Port Configuration Items shown on this screen are as follows: Port If desired, click Browse to select a different device. (The Select Device Port button is provided to allow this software to work with multi-port models.) The Port Name is shown in the Printer's Properties. Banner Check this option to print a banner page before each print job. • If using a PostScript Printer, check the PostScript box. • The User Name will be printed on the banner page. Retry Interval Sets how often Windows will poll the LevelOne Broadband Router to establish a connection when the printer is busy. Increase this value if you get too many warning messages. LevelOne Broadband Router User Guide LPD/LPR Printing LPD/LPR printing can be used with Windows NT 4.0 Server or Windows 2000. No software needs to be installed on client PCs. Windows NT 4.0 Server Configuration To use LPD printing, Microsoft TCP/IP Printing must be installed and enabled. This can be checked using Start-Settings-Control Panel-Network -Services. To install LPD printing using the LevelOne Broadband Router, follow this procedure: 1. Go to Start-Settings-Printer and invoke the Add Printer wizard. 2. When prompted with "This printer will be managed by..", select My Computer and click Next. 3. Select Add Port, then select LPR Port and click New Port. 4. In the Dialog requesting Name of Address of server providing lpd, enter the IP address of the LevelOne Broadband Router. 5. For Name of printer or print queue on that server, enter L1 6. Click OK. When returned to the Printer Ports window, simply select Close and then install your printer driver as usual. 7. When prompted whether or not the printer will be shared, select the Sharing radio button. 8. In the Shared dialog box, enter the shared printer name. The shared name is how other users will see this printer. You should advise client PCs of the Server name and this printer name. 9. Click OK to save and exit. PC Configuration Windows 2000 Server Configuration The LPD/LPR Port is not enabled by default. To enable it, use this procedure: 1. In Control Panel, select Add/Remove Programs, then Windows Components. 2. Select Other Network File and Print Services, then click the Details button. Figure 28: Adding LPD/LPR Port (Win 2000) 3. Enable Print Services for Unix, and click OK. 4. Click Next and complete the Wizard. Adding the Printer 1. Open your Printers folder, and start the Add Printer Wizard. 2. When prompted, select Local Printer. 3. On the Select the Printer Port screen, select LPR Port, as shown below. Click Next to continue. LevelOne Broadband Router User Guide Figure 29: Windows 2000: Select Port 4. In the Dialog requesting Name or Address of server providing lpd, enter the IP address of the LevelOne Broadband Router. 5. For Name of printer or print queue on that server, enter L1 6. Click OK, and then Next, and continue the Wizard. 7. At the Select Sharing screen, select the Radio Button for Share As, and enter the shared printer name. The shared name is how other users will see this printer. You should advise client PCs of the Server name and this printer name. 8. Complete the Add Printer wizard. Client PC Setup for LPD/LPR Printing After configuring the Windows Server, client PCs on the LAN can install the new printer. The following procedure is for Windows 95/98/ME, Windows NT4.0, and Windows 2000 workstation. 1. Open your Printers folder, and start the Add Printer Wizard. 2. When prompted, select Network Printer 3. When prompted for Network Path or Queue Name, click the Browse button, and locate the Server and Printer which your Network Administrator advised you to use. 4. Click OK, then Next. 5. Select the correct printer Manufacturer and Model, as advised by your Network Administrator, and click Next. 6. Follow the prompts to complete the Wizard. 7. The new printer will be listed with any other installed printers, and may be selected when printing from any Windows application. PC Configuration Macintosh Clients From your Macintosh, you can access the Internet via the LevelOne Broadband Ro...
Questo manuale è adatto anche per i modelli :Rettificatrici - FBR-1100TX (912.89 kb)
Rettificatrici - FBR-1400TX (912.89 kb)
Rettificatrici - FBR-1700TX (912.89 kb)