valutazioni - 0, GPA: 0
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
This parameter enables you to specify the channel on which the Clavinova receives MIDI data. Setting range: ALL, 1&2, 1 – 16 Normal setting: ALL NOTE ALL: “Multi-timbre” Receive mode. This allows simultaneous reception of different parts on all 16 MIDI channels, enabling the Clavinova to play multi-channel song data received from a music computer or sequencer. 1&2: “1&2” Receive mode. This allows simultaneous reception on channels 1 and 2 only, enabling the Clavinova to play 1 and 2 channel song data received from a music computer or sequencer. NOTE Program change and other like channel messages received will not affect the CLP-240/230’s panel settings or the notes you play on the keyboard. NOTE No MIDI reception occurs when Demo mode is engaged or during file operations (CLP-240). (CLP-240)/F7.3: (CLP-230) Local Control ON/OFF “Local Control” refers to the fact that, normally, the CLP-240/230 keyboard controls its internal tone generator, allowing the internal voices to be played directly from the keyboard. This situation is “Local Control On,” since the internal tone generator is controlled locally by its own keyboard. Local control can be turned OFF, however, so that the CLP-240/230 keyboard does not play the internal voices, but the appropriate MIDI information is still transmitted via the MIDI OUT terminal when notes are played on the keyboard. At the same time, the internal tone generator responds to MIDI information received via the MIDI IN terminal. Setting range: ON/OFF Normal setting: ON (CLP-240)/F7.4: (CLP-230) Program Change ON/OFF Normally the CLP-240/230 will respond to MIDI program change numbers received from an external keyboard or other MIDI device, causing the correspondingly-numbered voice to be selected on the corresponding channel (the keyboard voice does not change). The CLP-240/230 will normally also send a MIDI program change number whenever one of its voices is selected, causing the correspondingly-numbered voice or program to be selected on the external MIDI device if the device is set up to receive and respond to MIDI program change numbers. This function makes it possible to cancel program change number reception and transmission so that voices can be selected on the CLP-240/230 without affecting the external MIDI device. NOTE For information on program change numbers for each of the CLP-240/230’s voices, refer to page 81 in the MIDI Data Format section. Setting range: ON/OFF Normal setting: ON (CLP-240)/F7.5: (CLP-230) Control Change ON/OFF Normally the CLP-240/230 will respond to MIDI control change data received from an external MIDI device or keyboard, causing the voice on the corresponding channel to be affected by pedal and other “control” settings received from the controlling device (the keyboard voice is not affected). The CLP-240/230 also transmits MIDI control change information when the pedal or other appropriate controls are operated. This function makes it possible to cancel control change data reception and transmission so that, for example, the CLP-240/230’s pedal and other controls can be operated without affecting an external MIDI device. NOTE For information on control changes that can be used with the CLP-240/230, refer to the MIDI Data Format on page 80. Setting range: ON/OFF Normal setting: ON ENGLISH CLP-240/230 Owner’s Manual 53 Detailed Settings – [FUNCTION] (CLP-240)/ (CLP-230) Panel/Status Transmit This function causes all the current CLP-240/230 panel settings (selected voice, etc.) to be transmitted via the MIDI OUT terminal. TERMINOLOGY Setup Data: Data that contains a set of panel settings for the Clavinova. Procedure 1. Set up the panel controls as desired. 2. Connect the Clavinova to a sequencer via MIDI, and set up the sequencer so it can receive the setup data. 3. Engage the Function mode and select (CLP240)/ (CLP-230). 4. Press the [+/YES] button to transmit the panel/status data. will appear on the LED display when the data has been successfully transmitted. NOTE See page 81 for a list of the “Panel Data Contents” transmitted by this function. NOTE Receiving the transmitted data: 1. Connect the Clavinova via MIDI to the device to which the setup data was transmitted previously. 2. Start sending the setup data from the device. The Clavinova automatically receives the setup data, which will be reflected in the panel settings. (For the data to be accepted, the Clavinova that receives the setup data should be the same model as the one that transmitted the setup data to the sequencer.) NOTE For more information on transmitting and receiving setup data via MIDI, refer to the owner’s manual for the connected MIDI device. (CLP-240)/ (CLP-230) Initial Setup Send This function lets you send the data of the panel settings to a computer. By transmitting the panel settings and recording them on the MIDI sequence recorder prior to the actual performance data, the instrument will be automatically restored to the same settings when the performance is played...