valutazioni - 0, GPA: 0
(
)
)
|
Facilità d'uso
4 Exit from the Restore mode. Press the [–/NO] or [+/YES] button. 46 H11 Owner’s Manual Message List Message List Message List In this chart, the comments are divided into two different parts: The initial sentence explains the meaning of the message or the underlying problem and the “ > ” mark indicates the possible solution. Message* Comment 0 0 1 Indicates failure in accessing the USB flash memory or media. >Use another USB flash memory or media. 0 0 2 Indicates that the song data cannot be loaded correctly. The file format is invalid. >Check the file format. 0 0 4 Indicates that the song data is too large to be loaded. Indicates that the protected song data cannot be loaded. 0 0 5 Media has not been formatted. >Format the USB flash memory device or media after making sure on your computer that the USB flash memory or media you are formatting does not contain important data. 0 0 6 Indicates that the protected song data cannot be loaded. 0 0 7 There is no song data. There is no file. 0 0 8 The USB flash memory device or media is not connected. >Connect a USB flash memory device or media to the USB [TO DEVICE] terminal. 0 1 0 The data cannot be saved to internal memory of the instrument. 0 1 1 Data in the USB flash memory hasn’t been restored. >Press the [PLAY/STOP] button. 0 2 0 This USB flash memory device cannot be used. >Use only USB flash memory devices compatible with the instrument. 0 2 2 Displayed when the total amount of USB flash memory or USB hub has become too large. >Refer to “Precautions when using the USB [TO DEVICE] terminal” on page 22. 0 2 3 Indicates failure in connecting the USB flash memory or media. 0 5 1 An error has occurred in the Moving Key function. The [MOVING KEY] status lamp lights in red. >Please contact your nearest Yamaha dealer or authorized distributor. 0 5 2 The temperature of moving key unit increases. The [MOVING KEY] status lamp flashes in red. >The instrument is automatically reset. ---Processing the current operation. C L 1 Initializing the voice settings to the normal settings (factory defaults). C L 2 Initializing the Internet settings to the normal settings. C L 3 Initializing to the normal settings. E 5 0 Some abnormality has been detected in the power of the Moving Key function. The [MOVING KEY] status lamp lights in red. >If this happens, turn off the power to the instrument and disconnect the plug. However, if the [USB] lamp is flashing as well, turn off the power only after the lamp [USB] lamp is off. Please contact your nearest Yamaha dealer or authorized distributor. E n d Displayed when the current operation is completed. F C L Indicates that internal memory has been cleaned up. The backup data in internal memory of the instrument, and voice settings are cleared, because the power has been turned off before the song save or load operations were completed. CAUTION Do not turn off the power of the instrument when “FCL” appears in the display. Doing so may cause the instrument to malfunction. F U L Displayed when the total amount of files has become too large. Displayed when internal memory is full. Displayed when the media is full. n – y Prompts you to confirm or cancel the overwrite operation. P r o Indicates that the media is write-protected. ENGLISH * When the message is a three-digit number (001-052), “Err” (Error) flashes alternately in the display with the number. * When an operation (such as saving or data transfer) is in process, the display shows a sequence of flashing dashes. H11 Owner’s Manual 47 Troubleshooting Troubleshooting Troubleshooting ENGLISH Problem Possible Cause and Solution The instrument does not turn on. The instrument has not been plugged in properly. Securely insert the female plug into the socket on the instrument, and the male plug into a proper AC outlet (page 15). A click or pop is heard when the power is turned on or off. This is normal when electrical current is being applied to the instrument. Noise is heard from the speakers or headphones. The noise may be due to interference caused by the use of a mobile phone in close proximity to the instrument. Turn off the mobile phone, or use it further away from the instrument. The overall volume is low, or no sound is heard. • The Volume is set too low: set it to an appropriate level using the [MASTER VOLUME] control. • Make sure a pair of headphones is not connected to the headphones jack (page 15). The pitch and/or tone of the Piano Voices in certain ranges do not sound right. The Piano Voices attempt to precisely simulate actual piano sounds. However, as a result of sampling algorithms, overtones in some ranges may sound exaggerated, producing a somewhat different pitch or tone. This is normal, and no cause for concern. Mechanical noise is heard when the keys move. The keyboard mechanism of this instrument simulates the keyboard mechanism of an actual piano. Mechanical noise is also heard on a piano. This is normal, and is no cause for concern. The USB flash memory device cannot...