valutazioni - 0, GPA: 0
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
sintetizzatori / pianoforte - PSR-E243 (123.76 kb)
sintetizzatori / pianoforte - PSR-E243 (2.48 mb)
sintetizzatori / pianoforte - PSR-E243 (405.07 kb)
sintetizzatori / pianoforte - PSR-E243 (68.67 kb)
Facilità d'uso
NOTE • This instrument cannot charge the batteries. Use only the specified charger device when charging. • Power will be automatically drawn from the AC adaptor if an AC adaptor is connected while batteries are installed in the instrument. 10 PSR-E243/YPT-240 Owner’s Manual Setting Up • Setting the battery type After installing new batteries and turning the power on, make sure to set the Battery Type appropriately (rechargeable or not) via Function number 025 (page 25). NOTICE • Failure to set the Battery Type may shorten the amount of the battery life. Make sure to set the Battery Type correctly. Using the music rest Insert the music rest into the slots as shown. Connecting Headphones or External Audio Equipment Any pair of stereo headphones with a 1/4” stereo phone plug can be plugged in here for convenient monitoring. The speakers are automatically shut off when a plug is inserted into this jack. The PHONES/OUTPUT jack also functions as an external output. You can connect the PHONES/OUTPUT jack to a keyboard amplifier, stereo system, mixer, tape recorder, or other line-level audio device to send the instrument’s output signal to that device. CAUTION • Do not use the instrument/device or headphones for a long period of time at a high or uncomfortable volume level, since this can cause permanent hearing loss. If you experience any hearing loss or ringing in the ears, consult a physician. • Before connecting the instrument to other electronic components, set all volume levels to the minimum, then turn off the power for all components. NOTICE • When the instrument’s sound is output to an external device, first turn on the power to the instrument, then to the external device. Reverse this order when you turn the power off. Connecting a Footswitch to the SUSTAIN jack You can produce a natural sustain as you play by pressing an optional Footswitch plugged into the [SUSTAIN] jack. NOTE • Make sure that the footswitch plug is properly connected to the SUSTAIN jack before turning on the power. • Do not press the footswitch while turning the power on. Doing this changes the recognized polarity of the footswitch, resulting in reversed footswitch operation. Turning the Power On/Off Turn down the [MASTER VOLUME] control to “MIN” then press the [ ] (Standby/On) switch to turn on the power. While playing the keyboard, adjust the [MASTER VOLUME] control. To turn off the power, press the [ ] (Standby/On) switch again for a second. While playing the keyboard, use the [MASTER VOLUME] control to adjust the volume to an appropriate level. CAUTION • When using a power adaptor, even when the power is off, a small amount of electricity is still being consumed by the instrument. When you are not using the instrument for a long time, make sure to unplug the AC power adaptor from the wall AC outlet. PSR-E243/YPT-240 Owner’s Manual 11 Setting Up Auto Power Off Function To prevent unnecessary power consumption, this instrument features an Auto Power Off function that automatically turns the power off if the instrument is not operated for a specified period of time. The amount of time that will elapse before the power is automatically turned off is set by default to 30 minutes. • To disable the Auto Power Off function: Turn off the power, then press the [ ] (Standby/On) switch to turn on the power while holding down the lowest key. • To set the time that elapses before Auto Power Off is executed: While holding down the [FUNCTION] button, press the [+] or [-] button several times until “AutoOff” (Function 024) appears then select the desired value. Settings: OFF, 5, 10, 15, 30, 60, 120 (minutes) Default value: 30 (minutes) NOTE • Generally, the settings are maintained even when the power is turned off. For details, see page 26. NOTICE • Depending on the instrument status, the power may not turn off automatically, even after the elapse of the specified period of time. Always turn off the power manually when the instrument is not in use. • When the instrument is not operated for a specified period of time while connected to an external device such as an amplifier, speaker or computer, make sure to follow the instructions in the Owner’s Manual to turn off the power to the instrument and the connected devices, in order to protect the devices from damage. If you do not want the power to turn off automatically when a device is connected, disable Auto Power Off. Selecting an EQ Setting for the Best Sound Several different master equalizer (EQ) settings give you the best possible sound when listening through different reproduction systems—the instrument’s internal speakers, headphones, or an external speaker system. 1 Hold down the [ULTRA-WIDE STEREO] button for longer than a second to call up “013 MasterEQ.” “MasterEQ” is shown in the display for a few seconds, and the current Master EQ type appears. 013MasterEQ Hold for longer than a second. Speaker1 013 Current Master EQ type 2 Use the [+] or [-] button to select the desired Master EQ type....