[ENTER] • Select “AutoOff” with Cursor [d] button, then change the value with [DATA] dial . [STORE] NOTICE • Depending on the instrument status (for example, the settings have been modified but not yet stored), the power may not turn off automatically, even after the elapse of the specified period of time. Always turn off the power manually when the instrument is not in use. • When the instrument is not operated for a specified period of time while connected to an external device such as an amplifier, speaker or computer, make sure to follow the instructions in the Owner’s Manual to turn off the power to the instrument and the connected devices, in order to protect the devices from damage. If you do not want the power to turn off automatically when a device is connected, disable Auto Power Off. • When Auto Power Off is set to “off,” the value will be retained even if the backup data saved on another device is loaded to the instrument. When Auto Power Off is set to something other than “off,” the value will be overwritten with loaded data. • Keep in mind that the amount of time that elapses before the power automatically turns off is reset to 30 minutes if you execute the Factory Set function (page 15). NOTE • The setting time is approximate. • To turn the power on after Auto Power Off has been executed, press the Standby/On switch once to set it to Standby, and then press it again to set to On. Adjusting the volume and the brightness of the display Adjust the volume levels of this instrument and the connected amplifier/speaker system. NOTE When connecting to a set of powered speakers or PA equipment, set the Master Volume to about 70%, then raise the volume of the powered speakers or PA equipment to the appropriate level. CAUTION Do not listen with the headphones at high volume for long periods of time. Doing so may cause hearing loss. If the display is not easily visible, while holding down [UTILITY], press [INC/YES]/[DEC/NO] to adjust for optimum visibility. Adjust the volume with the [MASTER Adjust the display contrast. VOLUME] knob. MX49/MX61 Playing the Demo Songs The MX49/MX61 features a variety of Demo Songs, showcasing its dynamic sound and sophisticated functions. Here’s how to play them back. 1 Press [FILE] and [UTILITY] at the same time. The DEMO display is called up. 2 Rotate the [DATA] dial to select a Demo Song. 3 Press [F/ K] (Play/Pause) to play back the Demo Song. The Demo Song currently shown on the display starts. NOTE To adjust the volume level of the Demo Songs, use the [MASTER VOLUME] Knob. 4 Press [J] (Stop) to stop the Demo Song. 5 In order to leave the DEMO display, press [EXIT]. 14 MX49/MX61 Owner’s Manual Setting Up Setting Up o the initial factory settings The original factory settings of this synthesizer’s User Memory can be restored as described here. The Performances, User Voices, and Utility settings of the User Memory will be reset to the initial factory settings. This operation is especially handy when you’ve unintentionally deleted or overwritten the Performances or Utility settings. NOTICE When the factory settings are restored, all the Performance, User Voice, and system settings in the Utility display you created will be erased. Make sure you are not overwriting any important data. Be sure to save all important data to your USB flash memory before executing this procedure (page 36). 1 Press [UTILITY], then press [JOB]. The Utility Job Select display is called up. 2 Use the Cursor [u]/[d] buttons to select the “02:FactrySet,” then press [ENTER]. The Factory Set display is called up. JOB Factory Set PowerOn Auto=off 3 Press [ENTER]. The display prompts you for confirmation. To cancel this operation, press [DEC/NO] here. In this case, in order to return to the top display, press [EXIT] repeatedly if necessary after canceling. q Are you sure? w e [NO]/[YES] r NOTICE When setting the “Power On Auto” to on and executing Factory Set, the Factory Set operation will automatically be executed each time you turn the power on. Keep in mind that this also means that your original data in the User Memory will be erased each time you turn on the power. Therefore, the parameter normally is set to off. If you set it to off and execute Factory Set, the Factory Set operation will not be executed when turning the power on the next time. 4 Press [INC/YES]. The Factory Set operation is executed. NOTICE For Factory Set operations that take longer to process, you will see a message during processing. While such a message is shown on the display, do not turn off the power. Turning the power off in this state results in loss of all user data and may cause the system to freeze (due to corruption of data in the User Memory). This could also result in the instrument not being able to start up properly, even when turning the power on next time. 5 Press [EXIT] several times to return to the top display. MX49/MX61 Owner’s Manual 15 Basic Operation and Displays Basic Operation and Displays The display ...

Questo manuale è adatto anche per i modelli :
sintetizzatori / pianoforte - MX61 (13.84 mb)
- ()
- ()