valutazioni - 0, GPA: 0
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
Please make sure that i-MX1 MIDI OUT terminal is connected to the MIDI IN terminal of the instrument, and the i-MX1 MIDI IN terminal to the MIDI OUT terminal of the instrument. Connection E For connection instructions, see page 7. Connection F For connection instructions, see page 7. Connection G For connection instructions, see page 8. i -MX1 iPad iPhone OUT MIDI THRU IN OUT MIDI IN 3 4 2 1 Lightning to MIDI 30-pin Adapter OUT MIDI IN MIDI OUT MIDI IN i -MX1 iPad iPhone OUT MIDI THRU IN OUT MIDI IN 3 2 1 MIDI OUT MIDI IN MIDI OUT MIDI IN iPad iPhone 1 Access point Wireless LAN Wireless LAN USB Wireless LAN Adaptor n • Connecting with MIDI terminals or a [USB TO HOST] terminal 1 Turn off the power of the instrument. Quit any open application software on your iPhone/iPad. 2 Connect your iPhone/iPad to the instrument. For the proper order, carefully follow the indicated instruction steps for each connection type. 3 Turn on the instrument. 4 The connection procedures are completed at step 3. Use the application on your iPhone/iPad to communicate with your instrument. NOTE Some applications need the appropriate setting to communicate with the instrument. For details, refer to the relevant application manuals. Operation with iOS 6 or later Note that iPhone and iPad devices running iOS 6 or later may, on rare occasions, fail to recognize the i-MX1. If this should occur, update the firmware of the i-MX1 to a new version according to the instructions in the attached PDF in the Yamaha website i-MX1 product page. iPhone/iPad Connection Manual 7 iPhone/iPad Connection Manual 8 . Connecting with the included accessory USB Wireless LAN Adaptor or UD-WL01 Connect your iPhone/iPad with the included accessory “USB Wireless LAN Adaptor” or the UD-WL01 via an access point such as a router. 1 Turn off the power to the instrument. Quit any open application software on your iPhone/iPad. 2 Connect the USB Wireless LAN Adaptor to the [USB TO DEVICE] terminal of the instrument. 3 Turn on the power to the instrument. 4 Display the Networks in the wireless LAN display of the instrument. NOTE For more information on displaying networks in the wireless LAN display of the instrument, refer to the Owner’s Manual or the Reference Manual of your instrument. For example, on the CVP-609/605: Menu . [Wireless LAN] NOTE If no signal from the access point is received, the access point cannot be listed. Also, closed access points cannot be listed. 5 Connect the instrument to the access point. From the Networks listed on the display, select the desired one. For a network with a lock icon ( ), you need to enter the password, and for the network without the lock icon, you can connect the network only by selecting it. When connection is done successfully, “Connected” is shown at the top of the display, and the icon shown below appears according to the signal strength. Required devices •USB Wireless LAN Adaptor included with your instrument or the optionally available UD-WL01 •Access poin...
Questo manuale è adatto anche per i modelli :sintetizzatori / pianoforte - CVP-605 Digital Piano (3.34 mb)
sintetizzatori / pianoforte - CVP-609 Digital Piano (3.34 mb)
sintetizzatori / pianoforte - CVP-609GP Digital Piano (3.34 mb)
sintetizzatori / pianoforte - P-255 (3.34 mb)