|
Facilità d'uso
¦Using the RECORDER Button Each press of the RECORDER button cycles through the recording options in the sequence shown below. METRONOME RECORDER LR SONG / Tracks Song Record Record While playing back. . . Track 2 Track 1 Playback Standby Record Standby Normal Lit Flashing Off E-14 Recording and Play Back Recording and Play Back Recording Your Keyboard Play After recording to either of the tracks of a song, you can record to the other track while listening to playback what you recorded in the first track. To record to a specific track of a song 1. Press the RECORDER button twice so its lamp is flashing. • At this time the L lamp will flash to indicate that the digital piano is standing by for recording to Track 1. 2. Use the LR button to select the track to which you want to record. • Make sure that the indicator lamp for the record track is flashing. Track 1: L lamp Track 2: R lamp Example: Track 1 Selected 3. Select the tone and effects (Track 1 only) you want to use in your recording. • Tone (page E-6) • Effect (page E-9) NOTE • If you want the metronome to sound while you are recording, configure the beat and tempo settings, and then press the METRONOME button. See “Using the Metronome” on page E-10 for more information. 4. Start playing something on the keyboard. • Recording will start automatically. 5. To stop recording, press the SONG ../• button again. • This will cause the RECORDER button and LR button lamps to change from flashing to lit. • To play back the track you just recorded, press the SONG ../.. button. 6. After you are finished recording or playing back, press the RECORDER button so its lamp goes out. E-15 Recording and Play Back Recording and Play Back To record to one track of a song while listening to the playback of the other track 1. Press the RECORDER button so its lamp is lit. 2. Press the LR button until the lamp of only the track to which you want to play back is lit. 3. Press the RECORDER button so its lamp is flashing. • This will cause the L lamp to flash. 4. Use the LR button to select the track to which you want to record. • Make sure that the indicator lamp for the record track is flashing. Example: To listen to playback of Track 1 as you record to Track 2 Lit (Play) Flashing (Record Standby) 5. Select the tone and effects (Track 1 only) you want to use for your recording. 6. Press the SONG ../.. button or play something on the keyboard. • This will start both playback of the recorded track and recording to the other track. 7. To stop recording, press the SONG ../• button. To play back from digital piano memory 1. Press the RECORDER button so its lamp is lit. NOTE • When a song has something recorded in both tracks, you can turn off one track and play back just the other track, if you want. Whether a track is on or off is indicated by the lamps above the LR button. Each press of the LR button cycles through the different possible track on/off settings. 2. Press the SONG ../.. button. • This starts playback of the song and/or track you selected. NOTE • You can change the tempo setting as a track is playing. •Press the SONG ../.. button again to stop playback. E-16 Recording and Play Back Recording and Play Back Deleting Recorded Data The following procedure deletes a specific track of a song. IMPORTANT! • The procedure below deletes all of the data of the selected track. Note that the delete operation cannot be undone. Check to make sure you really do not need the data in digital piano memory before you perform the following steps. 1. Press the RECORDER button so its lamp is lit. 2. Press the RECORDER button again so its lamp is flashing. 3. Use the LR button to select the track you want to delete. • This causes the lamp of the selected track to flash. 4. Keep the RECORDER button depressed until its lamp changes from flashing to lit. Example: To delete Track 2 5. Press the LR button. • This deletes the selected track and enters playback standby. • To cancel the delete operation, press the RECORDER button in place of the LR button. NOTE • Only the digital piano’s LR button and RECORDER button are operational from step 4 until you actually perform the delete operation in step 5. No other button operation can be performed. E-17 Configuring Settings with the Keyboard In addition to selecting tones and Music Library tunes, you also can use the TONE/SETTING button in combination with the keyboard keys to configure effect, keyboard touch, and other settings. 1. Use the “Parameter List” on page E-20 to find the setting you want to configure, and note its details. 2. Use “Keyboard Keys Used for Configuring Settings” on page E-19 to find the location on the keyboard for configuring the setting you want. 3. While holding down the TONE/SETTING button, press the keyboard key for the setting you want to configure. • The digital piano will sound an operation tone after it configures the setting. Example:To lower the transpose setting by one semitone by pressing the .. keyboard key once. 4. ...
Questo manuale è adatto anche per i modelli :Strumenti Musicali - AP-400 (2.54 mb)
Strumenti Musicali - AP-400CY (2.54 mb)