4 1.1 COMPOSITION OF THE MANUAL ...................................................................................... 4 1.2 GUARANTEE ....................................................................................................................... 4 1.3 PRODUCT RESPONSIBILITY ............................................................................................. 4 1.4 WARNING SIGNS IN THE MANUAL AND ON THE MACHINE............................................4 2 SAFETY REGULATIONS AND

2) bearing one of the marks indicated in the tables of the allowed fittings (see the following paragraph). 3.1 TABLES OF FITTINGS ALLOWED Table N° 18a let you identify the version of your machine indicating the basic equipment and all the possible fittings available (optional). You can also find the other fittings allowed or other versions to meet your requirements in the future. THE EQUIPMENT DEFINED IN THE TABLES OF THIS HANDBOOK (TAB: 18a, page 31) SHOULD BE CONSIDERED BINDING FOR THE VALIDIT

8.2.3 MULTIPLIER LUBRICATION The multiplier and disengaging boxes are normally lubricated in an “oil bath”, in special cases NLGI n.0 grease is used. The viscosity is an essential characteristic of a lubricant oil and this is indicated by the SAE (SOCIETY OF AUTO-MOTIVE ENGINEERS) classification of the oils for gearboxes and differentials. Special additives improve the capacity of the oil to maintain a lubricant film also at high pressures and temperatures. We recommended using SAE 90 oil for th

WARNING: the indications to follow for using chemical products are indicated in paragraph 2.2.1. 4.12.2PREMIXER ON COVER (OPTIONAL): Open the cover and pour all of the chemical powder into the filter, close the cover and open the supply tap until all of the powder has dissolved. 4.12.2PREMIXER ON COVER (OPTIONAL): Open the cover and pour all of the chemical powder into the filter, close the cover and open the supply tap until all of the powder has dissolved. FIG. 15 4.12.4COVER WASHER FOR CHEMIC