valutazioni - 3, GPA: 4
(
)
)
|
Facilità d'uso
¦ Turn OFF the power for safety when not using the scanner for a long period of time, such as overnight. Also, turn OFF the power, and disconnect the AC adapter from the scanner and disconnect the power cord from the power outlet for safety when the machine will not be used for an extended period of time, such as during consecutive holidays. ¦ Do not wear loose clothing or jewelry that may get caught in the scanner while you are using it. This may result in personal injury. Be extra careful of neckties and long hair. If anything becomes caught in the scanner, immediately disconnect the power cord to stop the scanner. ¦ Be careful when placing paper in the scanner and when removing jammed paper. It is possible to cut your hand on the edge of a sheet of paper. . About the Fingerprint Sensor (ScanFront 300P only) . The following actions may damage the sensor or cause it to malfunction: – Dropping an object on the fingerprint sensor, or otherwise subjecting it to a strong impact – Scratching the surface of the fingerprint sensor, or poking it with a pointed object – Pressing a hard object such as a fingernail or metal item against the fingerprint sensor – Touching the fingerprint sensor with dirty hands – Placing a sticker on the surface of the fingerprint sensor, or covering the surface with ink or another substance . If fingerprint authentication fails frequently, the fingerprint sensor may be dirty. Clean the surface of the fingerprint sensor regulary. . When cleaning the fingerprint sensor, use a soft dry cloth to wipe dirt off the surface. . Do not use a pointed object to remove any dirt that accumulates around the fingerprint sensor. Doing so may cause the fingerprint sensor to malfunction. . Touching the fingerprint sensor while charged with static electricity may cause the fingerprint sensor or scanner unit to malfunction. Before touching the fingerprint sensor, discharge any static electricity by touching a piece of metal. Be especially careful during dry periods, such as the winter season, when the likelihood of being charged with static electricity is high. . Disposal . Prior to disposing of the scanner, initialize the scanner to ensure that the registered data is deleted. . When disposing of the scanner, make sure to follow all local ordinances and laws or consult with the retailer who sold you the scanner. 1 Before Use 1-5 2. Names and Functions of Parts The names and functions of the parts of the ScanFront 300/300P are shown below. . Front and Document Feed and Eject Trays a Tray Extension Open this to prevent scanned documents from slipping off. b Document Eject Tray Open this tray when using the ScanFront. If scanned documents curl in the document eject tray, remove the entire tray. (See p. 2-4.) c Panel Unit Open this when there is a paper jam or to perform maintenance. (See p. 2-10.) d Touch Panel Touch this screen to operate the ScanFront. e Lock Lever Locks the panel unit. Pull the lever toward you to unlock the panel unit. (See p. 2-10.) f Document Guides Adjust these to match the width of the document. (See p. 2-6.) g Document Feed Tray Place documents here. (See p. 2-4.) h USB Port (Front) Connect a USB1.1/Hi-Speed USB2.0 compatible USB memory device, USB keyboard, or USB mouse. i Power Switch Use this to turn the power ON. (See p. 3-3.) * Use the Power OFF button on the touch panel to turn the power OFF. j Feed Selection Lever Use this lever to change the feed method for documents. (See p. 2-5.) k Power Indicator Lights when the power is ON. (See p. 3-3.) l Fingerprint Authentication Sensor (Only Available with the ScanFront 300P) This fingerprint sensor is for fingerprint registration and authentication. (See p. 2-11.) . Side and Rear 1 Before Use m USB Port (Rear Left) Connect a USB1.1/Hi-Speed USB2.0 compatible USB memory device, USB keyboard, or USB mouse. n Power Connector (24 VDC) Connect the plug of the supplied AC adapter. o Kensington Slot This is an anti-theft slot that enables a key chain or lock to be connected to prevent theft. p Service Switch This is a service switch. Do not insert any object into this hole. q LAN Port (RJ-45) Connect an RJ-45 (10Base-T/100Base-TX) compatible network cable. r USB Ports (Rear Right) Connect a USB1.1/Hi-Speed USB2.0 compatible USB memory device, USB keyboard, or USB mouse. s Ventilation Holes 1-7 1-8 Chapter 2 Handling Chapter 2 Handling 1. Documents....................................................... 2-2 Plain Paper............................................................2-2 Business Card.......................................................2-2 Card ......................................................................2-3 2. Preparing the Scanner..................................... 2-4 Preparing the Document Feed Tray and Eject Tray ..............................................................2-4 Feed Selection Lever ............................................2-5 USB Port ..............................................................
Questo manuale è adatto anche per i modelli :scanner / copiatrice / MFP - 300P (7.03 mb)