valutazioni - 4, GPA: 3.8
(
)
)
|
Foto e specifiche Canon CanoScan 3200F |
Facilità d'uso
For Mac OS 9: Microsoft Outlook Express or Eudora. * Sending multiple images to MS Entourage using the Multi-Scan function is not supported. • If you press the [Cancel] button while scanning, you can change the default settings for scanning. For changing settings or arranging the scanner button assignments, refer to the CanoScan Toolbox section of the Scanning Guide (HTML format manual). 10 Scanning Film (for CanoScan 3200F only) Scanning Film (for CanoScan 3200F only) You can scan a single frame of 35 mm film (strips or slides) with CanoScan 3200F. Positioning the Film 1 Remove the protective sheet from the document cover. Slide the protective sheet up to remove it. When you finish scanning, replace the protective sheet by aligning it with the grooves in the document cover and sliding it downward into place. • Store the protective sheet in a safe place so that it will not get bent or broken. • Always replace the protective sheet when you are not scanning film to prevent the light source section from getting scratched. 2 Insert a fingernail into the slot in the Film Guide and remove the Film Holder. Film Holder 3 Place the film face down into the groove in the Film Guide. 35 mm Strip Slide Align the frame you wish to scan with the Film Place a slide face down over the Film Guide's Guide's window. window. • Hold the film by the edges with your fingertips to avoid getting fingerprints or dirt on the film surface. • Remove dust from the film, the document glass and the light source. 11 Scanning Film (for CanoScan 3200F only) 4 Clip the Film Holder back into the slots in the Film Guide for a 35 mm strip. Film Holder Slides do not require the Film Holder to be closed. 5 Place the loaded Film Guide in the correct position on the document glass of the scanner. Calibration Slot Align the Film Guide’s mark with the scanner’s mark. • The Film Guide has a calibration slot used by the scanner to calculate the color balance. The film cannot be scanned with the correct color balance if this slot is obstructed. Keep it clear. 6 Close the document cover. • You can purchase the Accessory Kit for CanoScan 3200F (CSAK-3200F) if the protective sheet or the Film Guide lost or damaged. 12 Scanning Film (for CanoScan 3200F only) Scanning Film The following steps explain how to scan the film with ArcSoft PhotoStudio. 1 Start ArcSoft PhotoStudio. Select [Start], [Programs] or [All Programs], [ArcSoft PhotoStudio 5.5] and [PhotoStudio 5.5]. Double-click the [Applications] folder for Mac OS X or the [Applications (Mac OS 9)] folder for Mac OS 9, followed by the [PhotoStudio] folder and the [PhotoStudio] icon. 2 Start ScanGear CS. Click the Acquire icon or click the [File] menu and select [Acquire]. Click the Acquire icon or click the [File] menu and select [Acquire]. • If an error message appears, click the [File] menu, choose [Select Source], select your scanner model name and click the [Select] button for Windows or the [OK] button for Macintosh. Windows Macintosh (Mac OS X) ScanGear CS will start. 3 Select the [Select source]. You can select from the following options for films. Negative Film (Color) / Positive Film (Color) 4 Click [Preview]. After calibration, the preview scan will start and gradually display the image. The image is automatically cropped. If you want to trim the image further, drag the mouse diagonally to select the area. • Do not open the document cover while a scan is in progress. 13 Scanning Film (for CanoScan 3200F only) 5 Select the [Destination]. You can select [Print] or [Image display]. When [Print] is selected, the output resolution is set to 300 dpi. When [Image display] is selected, it is set to 150 dpi. [Print] is selected in this example. 6 Select the [Output Size]. You can select from the following options. • If you selected [Print] in Step 5: Flexible / 4"x6" / A4 / Letter / Custom Settings • If you selected [Image display] in Step 5: Flexible / 640 x 480 / 800 x 600 / 1024 x 768 / 1600 x 1200 / 2048 x 1536 / Custom Settings [Flexible] is selected in this example. Selecting [Flexible] scans and enlarges one film frame to the 4"x6" size. If the display mode is set to Thumbnail Display Off, the image is scanned at the same size as the original film. See the Scanning Guide for information about the Thumbnail Display mode. Selecting an option other than [Flexible] in the [Image Display] category allows you to select the output size in pixels. You can scan film at the correct dimensions for computer displays (screen area) and digital cameras. 7 Click [Scan]. The final scan will start. When the scan is complete, click the ScanGear CS close box (Windows) or (Mac OS X) or (Mac OS 9) . The scanned image will appear in ArcSoft PhotoStudio. 8 Save the scanned image. Click the [File] menu and select [Save As]. Select the folder where you wish to store the image file, enter a file name, select a file type (JPEG format is recommended) and click [Save]. 9 Click close box (Windows) or (Mac OS X) or (Mac OS 9) in t...
Questo manuale è adatto anche per i modelli :scanner / copiatrice / MFP - CanoScan 3200 (2.15 mb)