valutazioni - 2, GPA: 4
(
)
)
|
Facilità d'uso
4 The job will be deleted. Press the JOB STATUS key or either lighting one of COPY key or PRINTER/NETWORK key on the control panel to return the basic screen (before JOB STATUS key is pressed on the step 1). If there is no job waiting to be printed, you can also return to the basic screen by pressing the RETURN key on the touch panel. 2-16 HOW TO MAKE COPIES Changing the Printing Order Press the JOB STATUS key on the control panel, then the JOB LIST key on the touch panel. 2 2 Select the job you want to move. 3 3 Press the MOVE key, then press the position where the selected job is to move to. -The job to be moved will be shifted next to new priority. -The job with top priority (having been printed or suspended) cannot be moved. 4 4 The changing order is completed. -If you want to return to the basic screen (before JOB STATUS key is pressed): Page 2-16, Tip 2-18 HOW TO MAKE COPIES 3. SETTING OF BASIC COPY MODES 1. PAPER SELECTION ................................................................ 3-2 -Automatic Paper Selection (APS) .............................................................. 3-2 -Manual Paper Selection ............................................................................. 3-3 2. REDUCTION AND ENLARGEMENT COPYING ..................... 3-4 3. DUPLEX COPYING (1-SIDED, 2-SIDED, BOOK-TYPE) ......... 3-7 4. COPY DENSITY ADJUSTMENT ........................................... 3-11 5. SELECTING ORIGINAL MODE ............................................. 3-13 6. QUICK ACCESS MENU ........................................................ 3-14 1. PAPER SELECTION Automatic Paper Selection (APS) When you place regular-sized originals on the glass or in the reversing automatic document feeder, the built-in sensors automatically work to detect the size of the originals, helping the machine select and copy on paper that is the same size as the original. * Depending on the condition of the original, automatic paper selection may not work correctly. In that case, select the paper size manually. Page 3-3 * This mode can only be used for actual-size (100%) copying. * Original sizes capable of automatic detection Page 2-9 1 1 Place paper in the drawer(s). Page 2-4 2 2 Place the original(s). Page 2-9 3 3 Confirm that the Automatic Paper Selection mode (default setting) is selected on the basic screen. -If the Automatic Paper Selection mode is not selected, press the ZOOM··· key, then press the APS key on the next screen. -If the following messages are shown, proceed as directed: Change direction of original Set correct drawer When the selected drawer size and the original size are the same, the machine rotates the original data 90° and makes a copy in the same size as the original even if those directions differ (e.g. a LT-size original is set while the same size paper is set in R direction).This function, however, is applicable to plain paper only. Select other copy modes as required. 4 4 Press the START key. 3-2 SETTING OF BASIC COPY MODES Manual Paper Selection It may not be possible for the device to perform Automatic Paper Selection with highly transparent originals such as OHP films and tracing paper, wholly dark originals or originals with dark borders, or irregular sized originals such as newspapers and magazines. For these types of originals, use manual paper selection. * When the desired size of paper is not set in any of the drawers, you can change the paper size of the drawer ( Page 2-6) or use the sheet bypass copying ( Page 5-8). 1 1 Place paper in the drawer(s). Page 2-4 -When using this mode in bypass copying, be sure to specify the paper size. Page 5-10, 5-11 2 2 Place the original(s). Page 2-9 3 3 On the basic screen, press the drawer icon representing the desired paper size. - OTHER key Or press the ZOOM··· key to enter the next screen, and press the key of the desired paper size. - Page 5-14 Select other copy modes as required. Press the START key. 2. REDUCTION AND ENLARGEMENT COPYING When placing originals on the glass, you can copy them at the reducing and enlarging rate of 25 to 400%. For the reversing automatic document feeder, you can make the copy at the reducing and enlarging rate of 25 to 200%. There are the following three ways of making copies in the reduction and enlargement mode: Using Automatic Magnification Selection (AMS) Specifying both original size and copy size Using the reduction/enlargement zoom keys or the one-touch zoom keys * It is not possible for the device to perform Automatic Magnification Selection with highly transparent originals such as OHP films and tracing paper, wholly dark originals or originals with dark borders, or irregular sized originals such as newspapers and magazines. For these types of originals, use the other reduction/enlargement modes. Original sizes for which Automatic Magnification Selection (automatic detection) is available Page * Set the paper size for “the OTHER” key as required ( Page 5-14). When the set originals or paper are a non-...
Questo manuale è adatto anche per i modelli :Stampanti - DP-6530 (4.52 mb)