valutazioni - 2, GPA: 4
(
)
)
|
Facilità d'uso
- For indoor use only. - Ensure that the cord does not come into contact with heat sources such as hotplates, cookers, etc., as this may damage the cord. - The device must not be covered or built in. OVERVIEW OF FUNCTIONS 9 2 8 1 3 1. Thermostat button 2. Switches with indicator lights 3. Feet 4. 8 Screws for feet 5. 4 Brackets for wall mounting 6. 4 Rawlplugs for wall mounting 7. 4 Screws for wall mounting 8. Fan (670-015) 9. Carrying handle MOUNTING THE FEET - Turn the device upside down. - Screw the feet firmly in position. WALL MOUNTING -The device can be wall mounted using the accompanying brackets, screws and rawlplugs. -The feet must not be mounted if the convection oven is to be mounted on the wall. -Do not mount the device in front of or under an electrical socket. Nor should it mounted under shelves, curtains or similar. 3 4 5 6 7 USE -Make sure the device is on a stable and level surface (fitted with feet) or that it is hanging securely on the wall. - Select the desired wattage using the 2 switches. There are 3 possible combinations: Switch I the device runs on 750 W. Switch II the device runs on 1250 W. Switches I + II the device runs on full wattage 2000 W. - Plug in. The device is now connected. - Switch on and select the highest thermostat setting (turn clockwise). - Once the room temperature reaches the desired level, turn the thermostat in an anti-clockwise direction until the indicator light goes out. - If you want to change the room temperature, turn the thermostat button in a clockwise direction to raise the temperature or anti-clockwise to lower it. - When the device is switched on, the indicator light will be on as long as the room temperature is lower than the temperature set on the thermostat. - After use, set both switches to 0 position and turn the thermostat in an anti-clockwise direction as far as it will go. Then remove the plug from the socket. Fan: Art. no. 670-015 has a built-in fan for better heat circulation in the room CLEANING Always unplug the radiator and let it cool before cleaning. Clean it with a dry or damp cloth or using a weak soap solution where necessary. Do not use abrasive cleaning agents. IMPORTANT - Do not plug in the radiator until it is assembled. - The radiator may only be used in an upright position. - Do not scratch the fins with sharp tools as damage to the enamel may lead to rust. - The radiator needs a free airflow to maintain maximum performance. Do not cover the openings. - The external surfaces of the radiator are hot. Do not leave children unattended close to the radiator. ENVIRONMENTAL TIP An electronic appliance should, when it is no longer capable of functioning be disposed with least possible environmental damage. The appliance should be disposed according to the local regulations in your municipality, in most cases you can discharge the appliance at your local recycling center. THE WARRANTY DOES NOT COVER: - If the above points have not been observed. - If the appliance has not be...
Questo manuale è adatto anche per i modelli :Sgombraneve - 670-014 (451.09 kb)