Log:
valutazioni - 3, GPA: 4.3 ( )

Istruzioni per l'uso Breville, Modello BJE820XL

Produttore : Breville
File Size : 1.82 mb
File Nome : BJE820XL.pdf
Lingua di insegnamento: enfr
Vai a scaricare



Facilità d'uso


Step 2 Based on the type of fruit or vegetable you are juicing/pureeing select either the Juice Extractor or the Puree Extractor. Warning: Do not put hard fruit and ! vegetables (ie. Carrots, apples, fresh beetroot, etc.) or ice through juicer when using Puree Extractor. This could damage parts of the unit. Step 3 Ensure the Dual Disc Juice Processor™ is correctly assembled – see previous instructions. Ensure the Juice Extractor or Puree Extractor is thoroughly cleaned before each use (refer to cleaning on pages 26-27). Ensure you place the Juice Jug (or glass) under spout before commencing juicing. Step 4 Plug the power cord into a 110/120V power outlet. The light surrounding the ‘Start | Stop” button will illuminate. NOTE: The light will be illuminated for 2 minutes before fading into sleep mode. The light will come back on by activating any of the controls. Step 6 With the motor running, place food into the Feed chute Using the Food Pusher, gently guide food down the Feed Chute. Do not exert excess pressure. To extract the maximum amount of juice, always push the Food Pusher down slowly. Step 7 – Using The Juice Extractor As fruits and vegetables are processed juice will flow into the juice jug and the separated pulp will accumulate in the Pulp Container. The Pulp Container can be emptied during juicing by turning the Dual Disc Juice Processor OFF at the control panel and then carefully removing the Pulp Container. Replace the empty Pulp Container into position before continuing to juice. NOTE: Do not allow the Pulp Container to over fill as this may affect the operation of the appliance. Step 5 Use the speed selector table as a guide for juicing different fruit and vegetables. Push the “Start | Stop” button and the unit will automatically start. 19 OPERATING YOUR BREVILLE DUAL DISC JUICE PROCESSOR™ OPERATING YOUR BREVILLE DUAL DISC JUICE PROCESSOR™ Step 8 – Using The Puree Extractor When using the Puree Extractor puree will flow into the juice jug. There will be no pulp extracted into Pulp Container. NOTE 1: SELF-RESET OVERHEATING PROTECTION The Breville Dual Disc Juice Processor™ also fitted with a self-resetting safety device which safeguards against overheating on the motor with excessive loads. If overheating occurs, the juicer will automatically activate the overheating protection device and the motor will switch itself off. If this occurs, the light surrounding the Start/ Stop button will flash red. When the overheating protection is activated, unplug the juicer from power outlet for at least 15 minutes to allow the unit to cool. Then plug juicer into the power outlet and use as normal. NOTE 2: ELECTRONIC PROTECTION The Breville Dual Disc Juice Processor™ will automatically stop operating if the motor is stalled. This is an electronic safety feature. Either too much food is being processed at one time or the pieces are not small enough. Try trimming food, cutting food into smaller pieces of even size and/or processing a smaller amount per batch. If this occurs, the light surrounding the Start/Stop button will flash red. To continue juicing, turn the power OFF at the power outlet, clear the feed chute, finally turn the appliance back on by pressing the Start/Stop button to “ON”. NOTE 3: OVERLOAD PROTECTION BUTTON The Breville Dual Disc Juice Processor™ is fitted with a safety device which safeguards against overloading with excessive loads. If this occurs, juicer will automatically activate the overload protection button and the unit will switch itself off. If this occurs, remove the plug from the outlet and allow the unit to cool. Then press the Overload Protection Button found on the bottom of the Motor Base. The safety device will then be reset and the Breville Juice Processor is ready for use again. 20 21 21 DISSASSEMBLING Your Breville Dual Disc Juice Processor™ DISSASSEMBLING YOUR BREVILLE DUAL DISC JUICE PROCESSOR™ DISSASSEMBLING YOUR BREVILLE DUAL DISC JUICE PROCESSOR™ Juice Extractor Step 1 Push the “START | STOP” button on the control panel of the Breville Dual Disc Juice Processor™ to turn off, then unplug the cord. NOTE: The light will be illuminated for 2 minutes before fading into sleep mode. The light will come back on by activating any of the controls. Step 3 Place both hands on either side of the Locking Arm and pull back and lift over the grooves on either side of the Juicer Cover. Step 2 Remove the Pulp Container by holding the handle and pivoting the bottom of the Pulp Container away from the juicer. 23 DISSASSEMBLING YOUR BREVILLE DUAL DISC JUICE PROCESSOR™ DISSASSEMBLING YOUR BREVILLE DUAL DISC JUICE PROCESSOR™ Step 4 Move the Locking Arm down. Step 5 Lift the Juicer Cover off the Breville Dual Disc Juice Processor™. Step 6 To remove the Filter Bowl Surround, hold base of juicer and turn Filter Bowl Surround by the Juice Spout. Step 7 Lift off the Filter Bowl Surround with the Juice Disc still in place. Step 8 To remove the Juice Disc, turn the Filter Bowl Surround upside down...


Scrivi la tua opinione del dispositivo



Il messaggio
Il tuo nome :
Inserire le due cifre :
capcha





categorie