valutazioni - 3, GPA: 4.3
(
)
)
|
Facilità d'uso
If the brand isn’t listed, see Scan for Device Codes on page 87. 3. Press and hold the device mode button until all the other mode buttons light up, and then release the button. The mode button flashes. For example, hold the TV mode button for a TV until all of the other mode buttons light. When you release the button, the TV mode light will flash. If you are repeating this procedure to program a combination device, be sure to press the correct mode button (for example, if you have a TV/VCR combination and you have already programmed the remote to control the TV, press and hold the VCR mode button, as described above). 4. For AUX mode setup only: • Press 0 for a second TV. • Press 1 for a second VCR or DVD player. • Press 2 for a tuner or audio amplifier. This step is for programming the kind of device that is to be programmed in AUX mode. If you’re not programming in AUX mode, skip to step 5. 5. Enter one of the three-digit device codes from the table using the number buttons. The three-digit device code should be for the brand name of your device that you found in step 2. 6. If you want to program limited mode, press 1. If not, skip to step 7. See Limited Mode on page 85 for more information . 7. Press the POUND (#) button. If you entered the code correctly, the mode button flashes three times. 8. Press the POWER button to turn off the device. If the device does not turn off, go to step 10. If the code is working, then the device should turn off. Also, if you’re programming TV mode, the TV POWER button on the remote control should be able to turn off your TV from any device mode. Tip: Limited mode is not used with audio amplifiers, tuners, or accessories. Limited Mode applies to a second TV, VCR or DVD player you set up in AUX mode. Page 87 Control Other Devices with the Remote Control Scan for Device Codes If the code for your device is not listed in the tables starting on page 109, use this procedure to scan the remote control’s memory for a working device code. 9. Turn the device back on and try some other buttons to make sure they work. If the code works for other buttons, then stop here. Sometimes the POWER or TV POWER button works when other buttons don’t. If the device does not turn off, continue with step 10. 10. If the code doesn’t work, redo steps 3 through 9 with another device code from the tables. Try every code listed for you brand until one works best for your device. 11. For combination devices: Return to step 3 and repeat this procedure. 12. If you can’t find a code that works, then try the Scan for Device Codes that follows. 1. Turn the device on. Use the device’s front panel buttons or its original remote control. 2. Press and hold the device mode button until all the other mode buttons light up, and then release the button. The mode button flashes. For example, hold the TV mode button for a TV until all of the other mode buttons light. When you release the button, the TV mode light will flash. 3. For AUX mode setup only. • Press 0 for a second TV. • Press 1 for a second VCR or DVD player. • Press 2 for a tuner or audio amplifier. This step is for specifying the kind of device that is to be programmed in AUX mode. If you’re not programming in AUX mode, then skip to step 5. 4. For AUX mode setup only: Press the STAR (*) button. 5. Press the POWER button (not TV Power). This puts your remote control in its device-code scan mode. Chapter 3 Page 88 Using the System Check the Device Codes You can find out what device code you’ve set for each remote-control mode. 6. Press the UP or DOWN ARROW button repeatedly until the device turns off. As you press the UP or DOWN ARROW button, the remote is trying each code in the memory to see if it can turn off your device. When the device turns off, you have found a code that might work. Note: The mode button for the device will flash rapidly eight times when you’ve scanned through all the available codes for that device. 7. Press the POUND (#) button. This stores the code you found. 8. Turn the device back on and try some other buttons to make sure they work. Press the POWER button to turn the device back on. Try some other buttons to make sure they work. Sometimes, the POWER button or TV POWER button works when other buttons don’t. 9. Repeat this procedure until you’ve tried all the codes. You may need to repeat the scan to find the best code for your device. 1. Press and hold the device mode button until all the other mode buttons light up, and then let go of the button. The mode button flashes. For example, hold the TV mode button for a TV until all of the other mode buttons light. When you let go, the TV mode light will flash. 2. Press the POUND (#) button twice. Watch the mode light to determine your code. The mode button flashes the number for each digit of the device code, with a pause between the groups of flashes. A quick flash is for zero. For example, if the code is 570, the mode button flashes five times, pauses, flashes seven times, pauses,...