valutazioni - 3, GPA: 3.7
(
)
)
|
Facilità d'uso
Press ok to confirm the new position. GB 19 Navi Bars Navi Bars Lock channels To open this menu, you will be asked to enter your access code. The access code is set to 1234 at the factory. You can lock (and later unlock) channels on any of the lists in order to prevent your children from watching them, etc. • Select the channel you want to lock and press info. Repeat the procedure for each channel you want to lock. • Press opt if you want to preview the channel. • Press ok to confirm. A locked channel will be marked with an " " symbol. You must enter your access code before you can watch a locked channel. Search folder When you want to search for channels at a later time. A channel search procedure can be performed in different ways: Automatic, Manual or Advanced manual search. Automatic search • Highlight the line and press ok to start searching for channels. Manual search Channel: Select the channel you want to search for. Network search: Select "Yes" if you want to search on all of the transmitters connected to a specific network. Press ok to start searching for channels. GB 20 Navi Bars Navi Bars Advanced manual search You can use this menu if you are looking for some "specific" channels (i.e., non-DVB standard channels) that are easier to find once you have entered the necessary PID settings here. Channel: Select the channel you want to search for. Network search: Select "Yes" if you want to search on all of the transmitters connected to a specific network. PID Video: Enter the PID (Packet Identifier) for the video signal. PID Audio: Enter the PID for the audio signal. PID PCR: Enter the PID for the PCR (Programme Clock Reference). •Press ok to tune with the specified values. Channels created with an advanced manual search will get an automatically generated name, e.g., P0001 for the first channel, P0002 for the second, etc. • Press ok to save the new channel or back if you do not want to save it. Access folder Receiver lock To open this menu, you will be asked to enter your access code. The access code is set to 1234 at the factory. If you select "Yes", you will have to enter the access code every time you start the Mediamaster from standby. Age rating control If you want everybody to have access to all available types of programmes, select "No". If you select "Yes", you may block programmes unsuitable for children. Age Limit Select an age limit between 3 and 18 years on the line that appears. NOTE: you should be aware that not all service providers have the necessary codes for these functions implemented in their transmissions. Change access code You can change the access code from the standard factory setting of 1234. NOTE: do not forget your access code as without it, you will not have access to any of the functions that require the code. If you should forget it, please contact Nokia Support for help. GB 21 Navi Bars Navi Bars Maintenance folder System Information When you enter the Maintenance folder, you will find general information about which hardware and software version your Mediamaster is running on. Reinstall Only use this option if you have to start the complete installation procedure from scratch. If you continue from here, all your previous settings, access code and favourite channels, etc. will be erased. If you do not want to reinstall, you can leave this menu when the warning is displayed by pressing "back". SW update Your Mediamaster will advise you from time to time of any new software upgrades using information sent by TV broadcasters through your aerial. This will appear as a message on your TV screen asking you to press ok to start the download. You are strongly advised to accept the download as this might enable you to receive new features and/or services that may be available to you. You can choose to postpone the download for a more convenient time by pressing the back button. The message will appear again provided that the software is still being broadcast. NOTE: These messages will only appear if your Mediamaster has been switched on from Standby. It is advisable to put your Mediamaster into standby when not in use. After downloading a new software version, all your previous settings, access code and favourite channels, etc. will be erased. NOTE: It may take a while to complete the update. NEVER turn off the Mediamaster, never use the remote control or disconnect the antenna cable during the download procedure as this will damage the software and the receiver will have to be sent in for service. GB 22 Navi Bars Navi Bars CA menu Information concerning the Conax/Viaccess smart card will be shown in this menu. Channel info Select this folder, press ok and you will receive channel information about frequency, symbol rate, etc. The information is given for the channel you are currently watching. GB 23 Nokia Mediamaster software end-user license Nokia Mediamaster software end-user license IMPORTANT: READ CAREFULLY BEFORE OR USING THE SOFTWARE NOKIA CORPORATION, NOKIA CORPORATION...