valutazioni - 15, GPA: 3.8
(
)
)
|
Facilità d'uso
It Is therefore recommended that the STB be disconnected from the mains power before connecting or disconnecting this cable. FAILURE TO DO SO COULD DAMAGE THE LNB. SERVICING: Do not attempt to service this product yourself. Any attempt to do so will make the warranty invalid. Refer all servicing to a qualified service agent. LIGHTNING: If the STB is Installed In an area subject to intense lightning activity, protection devices for the STB mains connector and modem telephone line are essential. The individual manufacturer's instruction for safeguarding other equipment, such as TV set, Hi-Fi, etc., connected to the STB must also be followed during lightning storms. GROUNDING: The ground of the LNB cable must be directly connected to the system ground for the satellite dish. The grounding system must comply with local regulations Note : Dispose the used batteries at designated place for environment protection GB-1 DSR 9500A FTA, Cl, EM VIA, VIA Cl CONTENT Safety Instructions.....................................1 General Features.......................................3 Connecting Your DSR 9500A..............................4 Description...........................................6 Front Panel...........................................6 Rear Panel...........................................7 Remote Control Unit....................................8 Basic Functions........................................10 Operating The Receiver.................................15 Main Menu............................................15 1. Installation........................................15 1.1 LNB Setting....................................16 1.2 Positioner Setting................................16 1.2.1 User Mode...................................17 1.2.2 Installer Mode.................................18 1.3 Solarsat Setting.................................18 1.4 Auto Scanning..................................19 1.5 Manual Scanning................................19 1.6 SMATV Scanning................................20 1.7 Reset to Factory Defaults..........................20 2. Channel Organising.................................21 2.1 Delete Satellite..................................21 2.2 Delete Transponder..............................21 2.3 Delete Channel.................................22 2.4 Delete All Channel...............................22 2.5 Delete Scrambled Channels........................22 2.6 Favorite Channel................................22 2.7 Move & Edit Channel.............................23 3. Parental Lock......................................24 3.1 Set Channel Lock................................24 3.2 Change PIN Code...............................25 4. System Setup......................................26 4.1 Language Selection..............................26 4.2 OSD Setting....................................26 4.3 Media Settings..................................27 4.4 Modem Settings.................................27 4.5 Time &Tlmer Setting..............................27 4.6 System Information..............................28 4.7 Software Upgrade...............................28 4.8 Copy Channel Data..............................28 5. Common Interface..................................29 6. Embedded Viaccess.................................29 Troubleshooting........................................30 Disposal..............................................30 Technical Specifications.................................31 GB-2 GENERAL FEATURES 1. USER SECTION » 4000 PROGRAMMABLE CHANNELS » SOFTWARE DOWNLOAD VIA SATELLITE & PC » ADVANCED ELECTRONIC PROGRAM GUIDE » MULTI LANGUAGE SUPPORTED FOR OSD » SUBTITLE &TELETEXT(OSD & VBI)SUPPORTED WITH MULTI LANGUAGE » DISEqC 1.2 SUPPORTED » FULL FUNCTION INFRARED REMOTE CONTROL UNIT » 7 SEGMENT LED DISPLAY » AUTO AND MANUAL SCAN FACILITY » CHANNEL ORGANIZING(PROGRAMMABLE) » SCARTS & RCA OUTPUT » LOW POWER CONSUMPTION » 9 FAVORITE LISTS » AUTO UPDATED EPG » PASS LOOP FOR RGB SIGNAL » 950-2150 MHz WIDE BAND TUNER » IF OUTPUT WITH DC PASS LOOP FOR ANALOG RECEIVER » SUPPORTING DISEqC 1.2 VERSION » 13V/18V SWITCHING » 22KHz CONTINUOUS TONE CONTROL » DVB-S COMPLIANT » MPEG-2 VIDEO(MP@ML) I 2-45 MS/s SYMBOL RATE » COMPATIBLE FOR BOTH SCPC/MCPC » SUPPORTS ASPECT RATIO 4:3(NORMAL) AND 16:9(WIDE SCREEN) » MODULATOR OUTPUT » MPEG 1 AUDIO LAYER I & II » MONO, DUAL, STEREO AND JOINT STEREO AUDIO MODE » 32, 44.1 AND 48 kHz SAMPLING FREQUENCIES » VOLUME CONTROL AND MUTE FUNCTION THROUGH REMOTE CONTROL UNIT » SPDIF DIGITAL AUDIO OUTPUT 2. TUNER SECTION 3. VIDEO SECTION 4. AUDIO SECTION GB-3 DSR 9500A FTA, Cl, EM VIA, VIA Cl CONNECTING YOUR "DSR 9500A" 1. LOCATION OF THE RECEIVER Your DSR 9500A should be placed under proper ventilation. Don’t put in completely enclosed cabinet that will restrict the flow of air, resulting in overheating. The location should be safeguarded from direct sunlight, excess moisture, rou...