Log:
valutazioni - 0, GPA: 0 ( )

Istruzioni per l'uso Philips, Modello HP4680/01

Produttore : Philips
File Size : 861.43 kb
File Nome :
Lingua di insegnamento: svitentresfrdenlptdafi
Vai a scaricare



Facilità d'uso


3). Follow this procedure for all attachments.To detach the attachments, turn the locking ring to the right and pull the attachment out of the handle. Unplug the appliance when you remove an attachment after or during styling. Avoid touching the metal and ceramic parts of the attachment, as they are hot. EnglisH using the appliance With the Girl Glam multi-styler you can create large rounded curls, ringlets, crimps, triangular curls and a straight, sleek look. 1 Connect the desired attachment to the handle (see chapter ‘Preparing for use’). Place the appliance on the support of the attachment and put the mains plug in the wall socket. The power-on light goes on and the appliance starts to heat , up. (Fig. ) 5 Start styling when the ready dot on the attachment changes colour (Fig. 5). When you use one of the curling attachments, always make sure you wind the end of the lock in the required direction. How long you have to keep the styler in the hair depends on the thickness of the hair. In case of fine hair, 5 seconds is long enough for a good result. Leave the styler in the hair longer (max. 10 seconds) if the hair is thicker. large rounded curls 1 Connect the large curling attachment to the handle. Make sure that the support points downwards. Take a lock of hair. Press the lever to open the clip and place the lock between the barrel and the clip. Release the lever and slide the barrel to the end of the lock.Then wind the lock round the barrel (Fig. 6). Make sure you wind the end of the lock in the required direction. Open the clip after 5 to 10 seconds and remove the attachment from the hair. Let the curls cool down before you comb, brush or finger-comb the hair into its final style. You can comb the curls with your fingers to add volume. 10 EnglisH ringlets Connect the large curling attachment to the handle and slide the spiral onto the curling attachment. Take a lock of hair. Press the lever to open the clip and place the lock between the barrel and the clip. Release the lever and slide the barrel to the end of the lock.Then wind the lock round the barrel along the spiral (Fig. 7). Make sure you wind the end of the lock in the required direction. Open the clip after 5 to 10 seconds and remove the attachment from the hair. Let the ringlets cool down before you comb, brush or finger-comb the hair into its final style. triangular curls 1 Connect the triangle attachment to the handle. Make sure that the stand points downwards. Take a lock of hair. Press the lever to open the clip and place the lock between the barrel and the clip. Release the lever and slide the barrel to the end of the lock.Then wind the lock round the barrel (Fig. 8). Make sure you wind the end of the lock in the required direction. Open the clip after 5 to 10 seconds and remove the attachment from the hair. Let the triangular curls cool down before you comb, brush or finger-comb the hair into its final style. crimps 1 Connect the crimping/straightening attachment with crimpingplates to the handle (Fig. 9). Take a lock of hair (max. 5 to 6cm wide). Press the lever to open the attachment and place the lock between the crimping plates. Start crimping at the roots (Fig. 10). Keep the plates locked for 5 to 10 seconds. EnglisH 11 Press the lever to open the attachment and place a lower section of the same lock of hair between the plates. Make sure there is an overlap. Repeat this process until you have reached the end of the lock. Let the crimps cool down. Do not brush or comb the crimps, as this wil ruin them. waves, curls and crimps disappear if your hair gets wet (for instance when you wash it).You can also use the straightening plates to make them disappear. sleek look 1 Open the crimping/straightening attachment. Remove the plates one by one by grabbing their cool tips and pulling them out of the attachment (Fig. 11). Turn the plates upside down and slide them back into the attachment (Fig. 1 ). Make sure that you insert the edges of the plates properly into the grooves. You have now turned the crimping attachment into a straightening attachment. Connect the attachment to the handle and follow the same procedure as for creating crimps. Another method to straighten the hair is to slide the straightening attachment slowly down the lock. Let the sleek hair cool down before you comb or brush it. If you have natural curls or waves, the straight result disappears if your hair gets wet (for instance when you wash it). cleaning Never immerse the appliance in water or rinse it under the tap. Remove the mains plug from the wall socket. Place the styler on the support of the attachment in a safe place and let it cool down. 1 EnglisH Clean the appliance and the attachments with a small brush or a dry cloth. storage Do not wind the mains cord round the appliance. Remove the mains plug from the wall socket. Place the styler on the support of the attachment in a safe place and let it cool down. Store the appliance and its accessories in the bag. Environm...


Scrivi la tua opinione del dispositivo



Il messaggio
Il tuo nome :
Inserire le due cifre :
capcha





categorie