valutazioni - 4, GPA: 4.3
(
)
)
|
Facilità d'uso
Automatic Cool-Down NOTE: Can be disabled. The automatic cool-down feature prevents the drain from opening until the temperature of the water in the sump falls below 140°F (60°C). This feature becomes active during a drain step, if the step is programmed for “drAI” when the temperature is above the threshold temperature. During the cool-down, the COLD fill valve is energized, the drain remains closed and the machine continues to agitate as it did prior to the cool-down. When the temperature falls below 140°F (60°C), the COLD fill valve turns off and the drain step proceeds as normal. Enabling/Disabling Cool-Down NOTE: Factory default is disabled. To enable or disable the cool-down feature, first enter Program Mode, refer to page 7, then proceed as follows: 1. After entering Program Mode display shows temperature. Press Stop (*) key. 2. Display shows “°CEL”. Press Start (#) key. 3. Display shows “HEAt”. Press Start (#) key. 4. Display shows “CooL” if cool-down is enabled or “noCL” if disabled. To change this, press Up or Down (arrow) key. 5. Press Start (#) key to save and return to Program Mode. F232139 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Programming Cycle Segment Charts Segment 1 (Prewash) Display Instructions Use the Up or Down key to change. Press the Start key to enter or advance. PrE 00 or 02 to 30 Select segment time: 02 to 30 minutes (00 to skip segment) HFIL, CFIL, or bFIL Select “HFIL” (hot fill), “CFIL” (cold fill), or “bFIL” (warm fill) LOLE or HILE Select fill level: “LOLE” (low), or “HILE” (high) water level SUP0–SUP7 Select supply 0 – 7 (0 for no supply) 00°F, 75°F–200°F 00°C, 25°C–93°C Select temperature: 75 to 200°F or 25 to 93°C (00 for no heat) SPIn (flashed for one second) tINE (flashed for one second) 00 or 30 to 120 Select time for spin: 30 to 120 seconds (00 for no spin) Segment 2 (Wash) Display Instructions Use the Up or Down key to change. Press the Start key to enter or advance. UASH 00 or 02 to 20 Select segment time: 02 to 20 minutes (00 to skip segment) HFIL, CFIL, or bFIL Select “HFIL” (hot fill), “CFIL” (cold fill), or “bFIL” (warm fill) LOLE or HILE Select fill level: “LOLE” (low), or “HILE” (high) water level SUP0–SUP7 Select supply 0–7 (0 for no supply) 00°F, 75°F–200°F 00°C, 25°C–93°C Select temperature: 75 to 200°F or 25 to 93°C (00 for no heat) SPIn (flashed for one second) tINE (flashed for one second) 00 or 30 to 120 Select time for spin: 30 to 120 seconds (00 for no spin) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232139 Programming Cycle Segment Charts (Continued) Segments 3 – 7 (Fills 1 – 5) Display Instructions Use the Up or Down key to change. Press the Start key to enter or advance. FIL1, FIL2, FIL3, FIL4, or FIL5 00 or 02 to 15 Select segment time: 02 to 15 minutes (00 to skip segment) HFIL, CFIL, or bFIL Select “HFIL” (hot fill), “CFIL” (cold fill), or “bFIL” (warm fill) LOLE or HILE Select fill level: “LOLE” (low), or “HILE” (high) water level SUP0–SUP7 Select supply 0 – 7 (0 for no supply) 00°F, 75°F–200°F 00°C, 25°C–93°C Select temperature: 75 to 200°F or 25 to 93°C (00 for no heat) SPIn (flashed for one second) tINE (flashed for one second) 00 or 30 to 120 Select time for spin: 30 to 120 seconds (00 for no spin) Segment 8 (Fill 6) Display Instructions Use the Up or Down key to change. Press the Start key to enter or advance. FIL6 00 or 02 to 15 Select segment time: 02 to 15 minutes (00 to skip segment) HFIL, CFIL, or bFIL Select “HFIL” (hot fill), “CFIL” (cold fill), or “bFIL” (warm fill) LOLE or HILE Select fill level: “LOLE” (low), or “HILE” (high) water level SUP0–SUP7 Select supply 0 – 7 (0 for no supply) 00°F, 75°F–200°F 00°C, 25°C–93°C Select temperature: 75 to 200°F or 25 to 93°C (00 for no heat) SPIn (flashed for one second) tINE (flashed for one second) 00 or 01 to 10 Select time for spin: 1 to 10 minutes (00 for no spin) F232139 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Programming Cycle Charts S-Series Microcomputers Standard Cycles Cycle Program 1 Light Soil Whites 2 Light Soil Colors 3 Medium Soil Whites 4 Medium Soil Colors 5 Heavy Soil Whites 6 Heavy Soil Colors PreWash Time (Min.) 0 0 0 2 2 2 Water - - - - -- Cold Hot Cold Level - - - - -- High High High Supply - - - - -- 0 0 0 Temp (F) - - - - -- 0 0 0 Spin (Sec.) - - - - -- 0 0 0 Wash Time (Min.) 6 6 7 7 5 5 Water Hot Warm Hot Warm Hot Warm Level Low Low Low Low Low Low Supply 5 1 1 1 1 1 Temp (F) 0 0 0 0 0 0 Spin (Sec.) 40 40 60 60 60 60 Fill 1 Time (Min.) 0 0 5 2 5 5 Water - - - - Hot Warm Hot Warm Level - - - - Low High Low Low Supply - - - - 2 0 1 1 Temp (F) - - - - 0 0 0 0 Spin (Sec.) - - - - 60 40 0 60 Fill 2 Time (Min.) 0 0 2 0 6 3 Water - - - - Warm - -Hot Warm Level - - - - High - -Low High Supply - - - - 0 - -2 0 Temp (F) - - - - 0 - -0 0 Spin (Sec.) - - - - 40 - - 60 0 Fill 3 Time (Min.) 0 0 0 0 2 0 Water - - - - -- - -Hot - - Level - - - - -- - -High - - Supply - - - - -- - -0 - - Temp (F) - - - ...