valutazioni - 4, GPA: 4
(
)
)
|
Facilità d'uso
• A suitable drying temperature, dryness level and options will automatically be indicated for the cycle selected. See the “Dryer Settings Chart” for more details. • To change the drying temperature and dryness level, press the Temp or Dry Level buttons to scroll to the desired settings. • To select or delete an option, press Options; then, while the indicator is blinking, press Select. The indicator will light when the option has been selected. It will no longer be lighted when the option has been deleted. • Adjustments made to a cycle will be remembered and recalled each time that cycle is selected in the future. • To return to factory settings, press the Start/ Pause and Select buttons at the same time and hold until the signal sounds. • Turn the cycle selector knob in either direction to select the cycle desired. • The estimated drying time for Auto Dry cycles or the actual drying time for Timed Dry cycles will be displayed. Operating Your Dryer, continued 5 Start the cycle. • To add or remove items when the dryer is running, open the door. The dryer will stop when the door is opened. Allow the drum to come to a complete stop before reaching inside. • Close the door and press Start to resume the cycle. 6 When the cycle ends, remove items immediately and hang or fold. Press and hold both for ten seconds to return to factory settings. OPERATING INSTRUCTIONS This manual covers many models and not all cycles, options, or features listed are available on every model. Consoles shown above for reference only. Your model may differ. Cycle Selection Turn the cycle selector in either direction to the cycle desired. Follow the fabric care label instructions on items to be dried. For best results To change the cycle once it has begun, press the cancel button before selecting a new cycle. Just turning the cycle selector knob to another selection will not change the cycle. Auto Dry Cycles Auto Dry cycles take the guesswork out of selecting the correct drying time for each load. Moisture sensing bars at the back of the dryer drum sense the moisture level of the load as it tumbles through the heated air. With Auto Dry cycles, the load will automatically be dried at the selected temperature to the desired dryness level. Auto Dry cycles save time and energy and protect fabrics. The estimated drying time will be displayed for about 5 minutes. Then the outside of the display will light up in a circular track to indicate the drying time is automatically being determined by the sensors. When the load has reached the selected dryness level, it will continue to tumble during a cool down period. This helps reduce wrinkling and makes items easier to handle during unloading. Drying time varies depending on size and dampness of load and fabric type. If the load is too small or almost dry, the moisture sensing bars may not detect enough moisture to continue the cycle and the cycle may end after a few minutes. If this occurs, select a Timed Dry cycle. Room temperature and humidity, type of installation and electrical voltage or gas pressure can also affect drying time. Towels (on select models) Select this Auto Dry cycle for towels and bath mats. Heavy (on select models) Select this Auto Dry cycle to dry durable fabrics such as jeans and overalls. Heavy/Bulky (on select models) Select this Auto Dry cycle to dry bedding and bulky items such as comforters, blankets, sleeping bags and parkas. OPERATING INSTRUCTIONS Cycle Selection, continued Bulky (on select models) Select this Auto Dry cycle to dry bedding and bulky items such as comforters, blankets, sleeping bags and parkas. Allergy (on select models) Select this Auto Dry cycle to compliment your washer’s Allergy cycle or where you wish to kill dust mites and remove 95% of allergens as you dry your load. Items prone to heat damage are not recommended for this cycle. Normal Select this Auto Dry cycle for cotton items. Casual Select this Auto Dry cycle for cottons and blends with a no-iron finish. Delicates (on select models) Select this Auto Dry cycle for knits and delicate items. Timed Dry Cycles WARNING FIRE HAZARD To avoid fire hazard, do not use heat to dry items containing feathers or down, foam rubber, plastics similarly textured, rubber-like materials. Use the Timed Dry cycle and the Air Dry setting. Quick Dry (on select models) Select this timed cycle to quickly dry small loads in 25 minutes. Timed Dry To manually select the drying time for any load, turn the knob to Timed Dry. Drying times from 15 to 90 minutes can be selected by continuing to turn the knob. Drying time will be displayed. You will not be able to select a Dryness level. Cycle Settings Follow the fabric care label instructions on items to be dried. For best results Appropriate drying Temperature, Dryness Level and Options will automatically be displayed for each cycle. The settings can be changed before the cycle is started. If changes are attempted after the cycle starts, the lights will blink, the signal wil...