valutazioni - 3, GPA: 3
(
)
)
|
Facilità d'uso
Open End Wrench or Adjustable Wrench 8 mm Socket Wrench REMOVE THE LEVELING LEGS Carefully lay the washer or dryer on its side to access the leveling legs on the bottom of the appliance. IMPORTANT: Do not lay the washer or dryer on its back! Do not remove the shipping bolts on the back side of the washer. The bolts must remain in place until the washer is returned to an upright position. Use an open-end wrench to remove the washer or dryer leveling legs. B A 1 INSTALLATION PREPARATION Remove the packaging. The Drawer divider is taped at the top of the shipping carton. Remove the divider and set aside for final installation. Flatten the product carton to use as a pad to lay the washer or dryer down on its side. Continue using the carton to protect the finished floor in front of the installation location. Back out and remove all 4 leveling legs Instructions en francais : . . . . . . . . . . . .4 Instrucciones en espanol: . . . . . . . . . . .8 For Washer Models: GBVH5140, GBVH6260, GCVH6260, GCVH6600, GHDVH626, GHDVH670, WBVH5100, WBVH6240, WCVH6260, WCVH6600, WHDVH626 and WHDVH660 For Dryer Models: DBVH510, DBVH512, DCVH515, DCVH660, DHDVH52, DHDVH66, PBVH415, PCVH565, PDVH515, PHDVH52 and PHDVH57 BEFORE YOU BEGIN Read these instructions completely and carefully. • IMPORTANT — Save these instructions for local inspector’s use. • IMPORTANT — Observe all governing codes and ordinances. • Note to Consumer – Keep these instructions with your Owner’s Manual for future reference. • Completion time – 1 to 2 hours • Proper installation is the responsibility of the installer. • Product failure due to improper installation is not covered under the Warranty. CAUTION — Due to the size and weight of these products, and to redu...
Questo manuale è adatto anche per i modelli :Lavatrici - SBSD137 (421.15 kb)