valutazioni - 2, GPA: 3.5
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
=S œ Short-circuit bnsakar Connecting the drain hose For Non-Pump Model • Be sure to reroute the hose so that it is not kinked; kinks or sharp bending in the hose will prevent proper drainage. • Make sure water is draineded smoothly by placing a base under the machine or by applying other appropriate mean. For Pump Model • L <= 1 m. 4 inn Before washing 1. Check the washing instruction labels on the clothing to be washed. 2. Remove all objects from the pockets of the clothing.Objects left in the pockets may damage clothing or break the washing machine (could cause the drain hose to clog). 3. After separating oiled or dyed clothing, wash. 4. For your convenience hang up the wash cover on the right or left side of the washing machine tub when not in use. Remove this before washing Screw Pin Sand Hbw to wash Set the drain selector For Non-Pump Uodoi \ For Pump Modal Set as 'Oft1 ! Set as -wach « Rhm-position. I position. Off WaBh-Rirwe Dr I Set the water selector . to "WASH" ^llll (QwASh) JSet the desired wash I time. Wash Timer 30pen water supply and fill water till water level mark "H". That is because clothes can absorb adequate amount of water -and water will not short." I Put the appropriate amount tof detergent and the laundry into the wash tub. And add water to the desired water level which you want. f When washing is finished, locate the drain selector to "Drain" position and drain the water out. For Non-Pump №xM Wash-Rinse Drain Drain Selector Off Wash ;ain Drain Selector j Select the wash program to "Gentle", "Normal" or "Strong" according to the kinds and quantity of the laundry. (Refer to Tabel 2) Gentle Normal Strong Wash Program 8 Spinning in the spin dryer basket. Move the laundry into the spin dryer basket. Put the laundry down lightly. Place the safety cover horizontally on the laundry. Set the f ffl ©