valutazioni - 0, GPA: 0
(
)
)
|
Facilità d'uso
– Press the A (Start/Pause) button. For programmes at low temperatures: – choose [ + B. – Select the A (Start/Pause) button. If you cancel the Drying programme, the laundry may still be very hot. Washing and drying • Turn the programme selector to the desired programme, Washing only e.g. DCottons (Cottons/Coloureds) 60°C. – The display panel alternately shows 2 (Remaining time) and the recommended load in kg. The % symbol flashes. • If necessary, adjust the temperature and the spin speed and select any options for your individualised programme, –> page 13. –The 5 (Drying) function must not be activated. i • Load the laundry –> page 8. – Observe the maximum load, Programme table –> page 28. • Press the A (Start/Pause) button. – 2 (Remaining time) is shown on the display panel. The % (Programme start) symbol lights up. – The washing programme starts. • Turn the programme selector to the desired drying programme. Drying only – The display panel alternately shows 2 (Remaining time) and the recommended load in kg. • Press the 5 (Drying) button to set the drying options –> page 14 – If you do not make a selection, the e (Cupboard-dry) option is set. i • Load the laundry –> page 8. – Observe the maximum load, Programme table –> page 28. • Press the A (Start/Pause) button. – 2 (Remaining time) is shown on the display panel and the 5 (Drying) and % (Programme start) symbols light up. – The drying programme starts. Successive washing and drying. Washing and drying • Set the programme selector to the desired programme, e.g. DCottons (Cottons/Coloureds) 60°C. – 2 (Remaining time) and the recommended load in kg are shown alternately on the display panel. The % symbol flashes. • If necessary, adjust the temperature and the spin speed and select any options for your individualised programme, –> page 13. • Press the 5 (Drying) button to set the drying options –> page 14 • Load the laundry –> page 8. – Observe the maximum load in kg, Programme table –> page 28. • Press the A (Start/Pause) button. The drying programme that is carried out is automatically determined by i the washing programme, see the Programme table –> page 28. End of the programme Rinse hold i Childproof lock The washing and drying programmes are ended automatically. appears on the display panel. • Turn the programme selector to $ (Off). • Remove the washing from the drum. • Leave the door open to allow the inside of the washer-dryer to dry out. • Turn off the tap (not necessary on models with Aqua-Stop). If the spin function was deactivated at the start of the wash cycle, $ (no final spin = laundry remains in last rinsing water), the washing programme is automatically stopped after the final rinse. The display panel shows alternating with . In order to Drain the rinsing water and, if required, spin the laundry: • Press the B (Spin) button repeatedly until the required spin speed is set. The water is Drained and the washer-dryer spins the laundry. The programme is completed when appears in the display field. The maximum spin speed depends on the selected wash programme. If you do not wish to spin the laundry: • Press the B (Spin) button (remaining time for Draining is displayed). The water is Drained, but the washer-dryer does not spin the laundry. The programme is complete when appears on the display panel. • Set the programme selector to $ (Off). • Remove the laundry. • Leave the door open to allow the inside of the washer-dryer to dry out. • Turn off the tap (not necessary on models with Aqua-Stop). For preventing the washer-dryer functions that you have set from being changed inadvertently. Activate/Deactivate: Press the Menu and Set buttons at the same time to activate or deactivate the Childproof lock. When the childproof lock is activated, E lights up on the display. Cleaning and care Safety information Housing and control panel Drum Detergent drawer Risk of electric shock You must disconnect the appliance from the mains first. Never clean the washer-dryer with a water jet. Risk of explosion. Never clean the washer-dryer with solvents. Risk of scalding Hot washing water must be cooled before Draining. Wipe with a soft, damp cloth. Remove detergent and cleaning agent residue immediately. Do not clean with a jet of water. Remove any foreign bodies from the drum and rubber seals. Descaling the drum: – Only use a proprietary brand of descaler with corrosion inhibitor for washing machines for descaling the washer-dryer. – Observe the manufacturer's instructions regarding use and dosage. – After descaling and removing rust from the drum, run the ' + Bprogramme several times to remove any remaining acid. If any remaining metal objects (e.g. coins, paper clips, needles, nails) have caused rust spots: – Use chlorine-free cleaning agents; observe the manufacturer's instructions. Never use steel wool. If there are detergent or care product residues: • Pull out the detergent drawer as far as the stop. • Press on the blue zone labelled PUSH and take out the deter...
Questo manuale è adatto anche per i modelli :Lavatrici - V6540X0EU/03 (678.92 kb)