valutazioni - 0, GPA: 0
(
)
)
|
Facilità d'uso
Please give the after-sales service the product number (E-Nr.) and production number (FD) of the appliance. Enter the number of your appliance here. You can find this information on the rating plate in the frame of the door. Please help us to avoid unnecessary call-outs by quoting the product and production numbers. This will also save you the associated additional costs. You can rely on the competence of the manufacturer. Please contact us. This way, you can ensure the repair is carried out by trained service technicians who are equipped with genuine spare parts. Installation instructions Safety information Included with the appliance The washer-dryer is very heavy. Take care when lifting it. Do not operate the washer-dryer if it has any visible damage. If you are in any doubt, please consult our after-sales service or your retailer. Do not install the washer-dryer outdoors or in areas exposed to frost. Frozen hoses can crack or burst. As a result, the washer-dryer could be damaged. Do not stand the washer-dryer upside down or on its side. Do not lift the washer-dryer by protruding parts (e.g. door). Do not place the washer-dryer behind a door or a sliding door which could prevent the washer-dryer door from being opened. This will prevent children from locking themselves in and putting their lives in danger. Remove the transport braces and cross connectors and store in a safe place. In addition to the instructions provided in this document, special regulations from the relevant water and electric utility companies may apply. If in doubt, have a technician connect the appliance. Number Description 4 Covers for openings left after removing the transport bolts. 1 Spanner 1 24-40 mm dia. hose clamp for connection to a siphon. 1 Door template 2 Door hinges with screws On the back of the washer-dryer: – Water Drain hose – Water supply hose – Mains cable with plug – Instruction manual and booklet containing after-sales service addresses Moisture may remain in the drum following the final inspection which every washer-dryer undergoes before leaving the factory. Removing the transport safety bolts Unscrew all four screws using the spanner supplied. Remove all 4 transport safety bolts completely and take the mains cable out of the retainers. Insert the protective covers. – Before using the appliance for the first time, you must make sure that all 4 transport safety bolts have been removed and kept safe for any subsequent transport. – If you need to transport the appliance at a later date, always refit the transport safety bolts to prevent damage to the washer- dryer. – Appliance stability is essential to ensure that the washer-dryer does not Positioning and “creep” during spin cycles. – The installation area must be firm, clean and level. levelling – Parquet floors and soft floor coverings, e.g. carpets or foam-backed floor coverings, are unsuitable. Slide sheets make it easier to slide the washing machine into the Positioning installation recess. – Can be ordered from the after-sales service, spare part no. 66 1827. – Moisten the slide sheets with a mixture of water and washing-up liquid before sliding the washer-dryer into place. Do not use grease and/or oil. Intense noise, vibrations and “wandering” may be the result of incorrect Levelling levelling. – All four appliance feet must stand firmly on the ground. – The washer-dryer must not wobble. – Check the levelness of the washer-dryer with a spirit level and correct if necessary. – The washer-dryer must not rest against the sides of the installation recess. – The lock nuts of the front appliance feet must be screwed tightly against the housing. . Hose and cable lengths Left-hand connection or Right-hand connection approx. 1350 approx. 1400 approx. 1000 approx. 760 min. 500 max. 900 approx. 1400 approx. 950 min. 500 max. 900 Dimensions in mm Dimensions Width x depth x height Weight 595 mm x 584 mm x 820 mm 85 kg To prevent leaks or water damage, you must observe the instructions in Water connection Water supply Water Drainage Drainage into a siphon this section. If in doubt, have a technician connect the appliance. The water supply and Drain hoses can be routed to the left of right, depending on installation conditions. Do not use a used inlet hose. Only use the inlet hose supplied or one which was purchased from an authorised specialist retailer. Do not allow the water supply hose to be: – kinked or squashed, – altered or cut (strength no longer guaranteed). Note the water pressure in the mains supply: The water pressure should be between 50-900 kPa (0.5-9 bar) (at least 8 litres of water flow out per minute when the tap is turned on). If the water pressure is higher, a pressure reducing valve must be fitted. Connect the cold-water supply hose (blue union nut) to the cold water tap with ." (3/4" = 26,4 mm) pipe thread. Only tighten plastic screw connections by hand. Do not remove the filter from the supply hose. After connecting the water supply hose: – Turn the ...
Questo manuale è adatto anche per i modelli :Lavatrici - 3TW64560A/03 (759.42 kb)
Lavatrici - 3TW64560A/04 (759.42 kb)