Make sure that there is no clothing obstructing the door. 3 Close the door by pushing lightly. If the door does not close completely, the machine will not start. This is a safety precaution. The door is locked until the end of the washing programme and it cannot be opened for about 2 minutes following the end of the programme. & Operation 1 Sort the laundry into groups with the same wash requirements. 2 Place laundry in the machine and gently close the door. 3 Add detergent/conditioner to

Push the front door to close it. If the front door is not closed correctly, washing does not start. • The selection of detergent and softener: The detergent amount depends on the hardness of water, the amount of laundry and the dirtiness level of the laundry. Recommended amounts are written on the detergent package. If your laundries are not very dirty and/or your water has a low hardness, use less detergent as recommended in the detergent packages. Otherwise you may encounter excessive foam. Yo

The values that are declared in the markings on your product or in the printed documents accompanying are obtained in a laboratory environment according to the related standards. These values may vary according to the usage of the product and environmental conditions. 4 EN Warnings | • This product is designed for household usage. • Your washing machine is adjusted to 230 volts. Your machine may not operate with low voltage. • If the current value of the fuse at your home is less then 16 amperes

Reducing Speed You may use the speed reduction button whenever you wish to spin your clothes below the maximum spin speed. When speed reduction button is pressed, spin speed will be at the minimum rpm given on the panel. No spin You may use this program if you do not want to spin your clothes at the end of cottons, synthetics, woolen or delicate programs. Time delay Applies for models with time delay function If you wish to wash your clothes at a later time, with the time delay function you can

This operation manual will… …help you use your machine in a fast and safe way. • Please read the Operation Manual before installing and starting your machine. • Particularly follow the instructions related to safety. • Keep this Operating Manual within easy reach. You may need it in the future. • Please read all additional documents supplied with this machine. Please note that this Operating Manual may be applicable for several other models. Differences between models will be identified in the m

C The auxiliary functions in the table may differ according to the model of your machine. 19 EN Auxiliary functions Auxiliary function selection keys 11a 11b 11c 11d • Depending on the program, you can select the desired auxiliary function by pressing the keys 11a, 11b, 11c, 11d. • Select the required auxiliary functions before starting the program. • Some combinations cannot be selected together. (Ex.: Prewash (Figure 2-11a) and Quick Wash (Figure 2-11b). • Symbol of the selected auxiliary func

To change the temperature, press the temperature button (Figure 2-9). Temperature falls with 10° decrements. Cold selection is shown with “-” symbol. When the “Temperature” button is pressed after coming to the Cold selection, the maximum temperature of the program you have selected will be displayed. To decrease the temperature, press the “Temperature” button again. 90.C Normally soiled, white cottons and linens. (Ex.: coffee table covers, tablecloths, towels, bed sheets) 60.C Normally soiled,

Use recommended amount of detergent appropriate for the laundry. Excessive laundry loaded into machine Do not load the machine in excess. Wrong program and temperature might have been selected. Select the proper program and temperature for the laundry to be washed. Improper detergent may have been used. Wrong type of detergent used. Put the detergent in the correct compartment. Do not mix detergent with bleaching agents. Washing performance is poor: Oily stains appear on laundry. Oily accumulati

Child-proof lock You can protect the appliance from being tampered by children by means of the child-proof lock. In this case, no change can be made in the running program. 2. The machine is switched to child-lock by pressing the 2nd and 4th auxiliary functions for 3 sec. “C:on” (Child lock is activated) label appears on the screen. The same symbol will also be displayed on the screen whenever any button is pressed while the machine is child- locked. To deactivate the child-proof lock, press the

With the alternative plugs a 13A fuse must be fitted either in the plug or adaptor or in the main fuse box. If in doubt contact a qualified electrician. 8 EN 3 Installation 3 Installation Removing packaging reinforcement Tilt the machine to remove the packaging reinforcement. Remove the packaging reinforcement by pulling the ribbon. Opening the transportation locks C Transportation safety bolts must be removed before operating the washing machine! Otherwise, the machine will be damaged! 1. Loose