(102 mm) 6 in. (152 mm) 7 in. (177.8 mm) 8 in. (203 mm) 10 in. (203 mm) 12 in. (305 mm) Table 4 9001000 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 45 Installation Water Connection WARNING To avoid personal injury, recommended inlet water temperature should be nohigher than 125° Fahrenheit (51° Celsius). W709 The 18-135 models are delivered with hoses with 3/4 inch hose connectors. The 165 model is delivered with 3 x 1 inch and 1 x 3/4 inch hose connectors. These hoses fi

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 70283501 11 Operation TMB2136N Figure 6 Dual Digital Timer Control RQ Control Suffix 1. Select HIGH, MED, LOW or NO HEAT by turning the temperature knob. 2. Set the HEAT TIME for the number of minutes (from 0-60) desired. 3. Set the COOL DOWN TIME for the number of minutes (from 0-15) desired. 4. Select reversing or nonreversing cylinder rotation setting, if applicable. 5. Press and release START button to start tumbler. Display

2. Check power circuit, supply voltage, fuses and disconnects. 3. Verify drive to motor wires are damage free, properly connected and torqued to specifications. 4. Check belt tension and condition. 5. Verify no mechanical problems exist (i.e., binding, motion restriction). 6. Check control input signals. Refer to applicable table of inputs. Problem: Drive started but wash basket is not rotating. Corrective Action 1. Verify drive to motor wires are damage-free, properly connected and torqued to s

3 Nameplate Location.............................................................................. 4 General Inspection................................................................................ 5 Storage .................................................................................................. 5 PowerFlex 40 and 400 Drive Control Logic ..................................... 6 Installation/Wiring................................................................................ 6 Input

Programming supply 1, 2 or 3 ONLY activates water in compartment A, B or C. Programming supply 4 activates relay 1. Programming supply 5 on the WE-8 will activate supply relay 2, etc. Programming supply 4-9 on the WE-8 will activate supply relay 1-6 on the board, respectively. Refer to Table 8. SupplyRelay SupplyRelay SupplyRelay 3 4 5 * L1 (220 VAC) wire or terminal for remote liquid supply connection. ** L2 common wire (220 VAC) or terminal for remote liquid supply connection. Figure 36 CFS8N

U135ME3A COM X - fmr RL RM RH STR STF Drive Control Connections V-COMPUTER OUTPUT BOARD Figure 41 U136ME3A J8 J2A 30 31 32 33 34 35 J7A J3B J1 Ribbon Terminals 1 thru 16 Terminals 17 thru 29 Drive Control Connections U136ME3A WE-6 INTERFACE BOARD Figure 42 U148ME3A 1 7 6 12 H2 H4 H1 H3 H5 Drive Control Connections EDC OUTPUT BOARD Figure 43 F232120 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Allen-Bradley 1305-Series AC Drives Control Wire During troubleshooting, if the w

(1194 mm) 24.4 in. (620 mm) 30.8 in. (782 mm) CFS468N 12.9 in. (328 mm) 10.4 in. (264 mm) 36.75 in. (934 mm) 37.8 in. (960 mm) 6.1 in. (155 mm) 35 in. (889 mm) 39.4 in. (1001 mm) 4.4 in. (112 mm) 15.5 in. (394 mm) 5 20 in. (508 mm) 38 in. (965 mm) 41 in. (1041 mm) 3.5 in. (89 mm) 1 3 2 4 8 7 9 10 6 25.16 in. (639 mm) 30.31 in. (770 mm) 8 in. (203 mm) 35 Pound Capacity Models with U in the 8th Position (e.g. *X35PVXU6) 46.3 in. (1176 mm) Figure 6 9001000 © Copyright, Alliance Laundry Systems LLC

Step 3: Determine Control Type and Temperature Setting Refer to the various controls, pages 9 - 13, follow instructions for the appropriate control type. The type of fabric being dried will determine the temperature setting. Consult the fabric care label or fabric manufacturer to determine proper temperature setting. IMPORTANT: Always follow the fabric care instructions supplied by the garment manufacturer. Step 4: Remove Laundry When the cycle is complete, open door and remove the laundry. © Co

Operating the machine with severe out-of-balance loads could result in personal injury and serious equipment damage. SW039 9001000 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 5 Introduction Model Identification Information in this manual is applicable to these models: HX18PVQM6 SX18PVPA7 UX18PVNA6 HX18PVQU6 SX18PVQU6 UX18PVNU6 HX18PVQM7 SX18PVQM6 UX18PVNA7 HX18PVXU6 SX18PVXU6 UX18PVPU6 HX18PVXM6 SX18PVQM7 UX18PVPA6 UX18PVQU6 HX18PVXM7 SX18PVXM6 UX18PVPA7 UX18PVXU6 SX18PVX

(10 mm) 0.38 in. (10 mm) .375 in. (10 mm) 0.38 in. (10 mm) .375 in. (10 mm) Number of steam inlets 1 1 1 1 1 Electrical Heating (Optional) Total electrical heating capacity 9 kW 9 kW 18 kW 18 kW 18 kW Electrical heating elements 3 3 6 6 6 Electrical heat element size 3 kW 3 kW 3 kW 3 kW 3kW 9001000 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 11 Specifications and Dimensions General Specifications Model 55 75 100 135 165 200 Overall Dimensions Overall width 35.4 in. (900 m