The values that are declared in the markings on your product or in the printed documents accompanying are obtained in a laboratory environment according to the related standards. These values may vary according to the usage of the product and environmental conditions. 4 EN Warnings | • This product is designed for household usage. • Your washing machine is adjusted to 230 volts. Your machine may not operate with low voltage. • If the current value of the fuse at your home is less then 16 amperes

Push the front door to close it. If the front door is not closed correctly, washing does not start. • The selection of detergent and softener: The detergent amount depends on the hardness of water, the amount of laundry and the dirtiness level of the laundry. Recommended amounts are written on the detergent package. If your laundries are not very dirty and/or your water has a low hardness, use less detergent as recommended in the detergent packages. Otherwise you may encounter excessive foam. Yo

At the final step “Cycle” led is on. When program is completed“Ready” led will be on again. During machine operation you can press “Start/Pause/Cancel” key for getting machine to “Pause” position. In this 15 case “Start/Pause/Cancel” led will blink. Changing Program You can use this feature for washing laundry in the same textile group for washing at lower or higher temperatures. For example, instead of Cotton60, Cotton40 can be used. For selecting Cotton40 instead of Cotton60 by pressing“Start/

It may become necessary, due to bulky fabrics, to adjust the water level after agitation begins. To adjust the water level, turn the control to reset and then back to the desired setting. WATER LEVEL SETTING LOAD SIZE Mini (select models) 1/4 Full Medium 1/4 – 3/4 Super 3/4 – Full Note: Items must circulate freely for best results. Select WASH/RINSE TEMP Your washer gives you a choice of hot, warm or cold water for washing and cold water for rinsing. Use the chart below as a guide. WASH/RINSE TE

Setting can be made in intervals of 30 minutes. 1. Open the loading door, place the laundry inside and fill with detergent. 2. Set the washing program, temperature, spin speed and, if required, select the auxiliary functions. 3. Press “Time delaying” buttons “+” and “-” (Figure 2-8) to set your desired time delay. Time delaying symbol (Figure 3-13h) will flash. 4. Press “Start/Pause/Cancel” button (Figure 2-10). Then the time delay starts to count down. Time delaying symbol (Figure 3-13h) will l

With the alternative plugs a 13A fuse must be fitted either in the plug or adaptor or in the main fuse box. If in doubt contact a qualified electrician. 8 EN 3 Installation 3 Installation Removing packaging reinforcement Tilt the machine to remove the packaging reinforcement. Remove the packaging reinforcement by pulling the ribbon. Opening the transportation locks C Transportation safety bolts must be removed before operating the washing machine! Otherwise, the machine will be damaged! 1. Loose

To change the temperature, press the temperature button (Figure 2-9). Temperature falls with 10° decrements. Cold selection is shown with “-” symbol. When the “Temperature” button is pressed after coming to the Cold selection, the maximum temperature of the program you have selected will be displayed. To decrease the temperature, press the “Temperature” button again. 90.C Normally soiled, white cottons and linens. (Ex.: coffee table covers, tablecloths, towels, bed sheets) 60.C Normally soiled,

C The auxiliary functions in the table may differ according to the model of your machine. 19 EN Auxiliary functions Auxiliary function selection keys 11a 11b 11c 11d • Depending on the program, you can select the desired auxiliary function by pressing the keys 11a, 11b, 11c, 11d. • Select the required auxiliary functions before starting the program. • Some combinations cannot be selected together. (Ex.: Prewash (Figure 2-11a) and Quick Wash (Figure 2-11b). • Symbol of the selected auxiliary func

Child-proof lock You can protect the appliance from being tampered by children by means of the child-proof lock. In this case, no change can be made in the running program. 2. The machine is switched to child-lock by pressing the 2nd and 4th auxiliary functions for 3 sec. “C:on” (Child lock is activated) label appears on the screen. The same symbol will also be displayed on the screen whenever any button is pressed while the machine is child- locked. To deactivate the child-proof lock, press the

Use recommended amount of detergent appropriate for the laundry. Excessive laundry loaded into machine Do not load the machine in excess. Wrong program and temperature might have been selected. Select the proper program and temperature for the laundry to be washed. Improper detergent may have been used. Wrong type of detergent used. Put the detergent in the correct compartment. Do not mix detergent with bleaching agents. Washing performance is poor: Oily stains appear on laundry. Oily accumulati