valutazioni - 2, GPA: 3
(
)
)
|
Facilità d'uso
5. Insert fasteners into the side of the magazine. Be sure the fasteners ride on their tips in the nail channel as shown in figure 5A. 6. Push magazine closed until it locks in place. Actuating Tool WARNING: Always wear eye and ear protection when operating tool. To operate the nailer: 1. Disengage lock off. 2. Insert battery pack and lock in place. 3. Depress the contact trip firmly against the work surface. 4. Depress and maintain pressure on the trigger. CAUTION: A nail will fire each time the trigger is depressed as long as the contact trip remains depressed. 5A 8 90514937 BDBN1202 1/18/07 9:14 AM Page 9 Clearing a Jammed Nail (Figure 6) If a nail becomes jammed in the nosepiece, keep the tool pointed away from you and follow these instructions to clear: 1. Engage lock off. 2. Disconnect battery. 3. Release pusher from behind nails. 4. Pull up on latch then pull up to open front door. 5. Remove bent nail, using pliers if necessary. 6. If driver blade is in the down position, insert screwdriver or other rod into nosepiece and push driver blade back in position. 7. Remove rod and close front door. 6 8. Lift latch to engage wire and pull back to lock in place. 9. Reinsert nails into magazine (see Loading the Tool). 10. Push magazine closed until it locks in place. Maintenance Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid. IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment (other than those listed in this manual) should be performed by authorized service centers or other qualified service organizations, always using identical replacement parts. The RBRC™ Seal The RBRC™ (Rechargeable Battery Recycling Corporation) Seal on the nickel-cadmium battery (or battery pack) indicates that the costs to recycle the battery (or battery pack) at the end of its useful life have already been paid by Black & Decker. In some areas, it is illegal to place spent nickel-cadmium batteries in the trash or municipal solid waste stream and the RBRC program provides an environmentally conscious alternative. RBRC in cooperation with Black & Decker and other battery users, has established programs in the United States and Canada to facilitate the collection of spent nickel- cadmium batteries. Help protect our environment and conserve natural resources by returning the spent nickel-cadmium battery to an authorized Black & Decker service center or to your local retailer for recycling. You may also contact your local recycling center for information on where to drop off the spent battery, or call 1-800-8-BATTERY. 9 90514937 BDBN1202 1/18/07 9:14 AM Page 10 T TTTTr rrrro oooou uuuub bbbbl lllle eeees ssssh hhhho ooooo oooot tttti iiiin nnnng gggg Problem Possible Cause Solution • LED status indicator is flashing red. • Nail jammed in the nosepiece. • Engage lock off. Disconnect battery. Release pusher from behind nails. See page 9. • LED status indicator is staying on RED . • Battery is low or out of power. • Recharge battery. • Nail will not fire. • Contact trip is not fully depressed. • Depress the contact trip firmly against the work surface. Depress and maintain pressure on the trigger. • Unit will not start. • Battery pack not installed properly. • Battery pack not charged. • Check battery pack installation. • Check battery pack charging requirements. • Battery pack will not charge. • Battery pack not inserted into charger. • Charger not plugged in. • Insert battery pack into charger until red LED appears. • Plug charger into a working outlet. Refer to “Important Charging Notes” for more details. • Surrounding air temperature too hot or too cold. • Move charger and battery pack to a surrounding air temperature of above 40 degree F(4,5°C) or below 105 degree F (+40,5°C). For assistance with your product, visit our website for the location of the service center nearest you or call the BLACK & DECKER help line at 1-800-544-6986. 10 90514937 BDBN1202 1/18/07 9:14 AM Page 11 Accessories Recommended accessories for use with your tool are available from your local dealer or authorized service center. If you need assistance regarding accessories, please call: 1-800-544-6986. WARNING: The use of any accessory not recommended for use with this tool could be hazardous. SERVICE INFORMATION All Black & Decker Service Centers are staffed with trained personnel to provide customers with efficient and reliable power tool service. Whether you need technical advice, repair, or genuine factory replacement parts, contact the Black & Decker location nearest you. To find your local service location, refer to the yellow page directory under "Tools—Electric" or call: 1-800-544-6986 or visit FULL TWO-YEAR HOME USE WARRANTY Black & Decker (U.S.) Inc. warrants this product for two years against any defects in material or workmanship. The defective product will be replaced or repai...
Questo manuale è adatto anche per i modelli :Chiodatrici - 90514937 (272.36 kb)
Chiodatrici - BDBN1802 (272.36 kb)