valutazioni - 3, GPA: 4
(
)
)
|
Facilità d'uso
Do not operate the tool in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. The tool is visitors away while operating the tool. Distractions are able to result in the loss of control of the tool pErsoNAl sAFETY a Stay alert. Watch what you are doing and use common sense non-skid safety shoes and a hard hat must be used for the applicable conditions f Always wear eye protection. g Always wear hearing able to create sparks resulting in the better control of the tool in ignition of the dust or fumes unexpected situations c Keep bystanders, children, and e Use safety equipment. A dust mask, when operating the tool. Do not use the tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating the tool increases the risk of injury to persons b . Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair increases the risk of injury to persons as a result of being caught in moving parts c . Avoid unintentional starting. Be sure the switch is off before connecting to the air supply. Do not carry the tool with your finger on the switch or connect the tool to th air supply with the switch on d . Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables protection when using the tool. Prolonged exposure to high intensity noise is able to cause hearing loss h . Do not attach the hose or tool to your body. Attach the hose to the structure to reduce the risk of loss of balance if the hose shifts i . Always assume that the tool contains fasteners. Do not point the tool toward yourself or anyone whether it contains fasteners or not j Do not nail on top of another nail. This is able to cause the nail to be deflected and hit someone, or cause the tool to react and result in a risk of injury to persons. k Remove finger from the trigger when not driving fasteners. Never carry the tool with finger on trigger, the tool is able to fire a fastener. Tool Components and specifications Adjustable Direction Nail Loading • rEqUirEs: 1 0 Average SCFM with 10 fasteners per minute @ 90 psi • Air iNlET: 1/4 inch NPT • NAil siZE rANGE: 1-1/2 inch to 2-1/2 inch • MAGAZiNE CApACiTY: 100 Nails per load, 15 gauge • WEiGHT: 5 lbs , 10 oz • lENGTH: 14 inch • HEiGHT: 12-1/4 inch • MAXiMUM prEssUrE: 120 psi • prEssUrE rANGE: 70 psi – 120 psi Adjustable Depth Control Specification Decal Exhaust Deflector Area Trigger Quick Clear Latch Nail Discharge Area Rubber No-Mar Tip Nail Pusher Assembly Aluminum Magazine Hard Anodized Warning Decal Trilingual 2 Never place hands or any other body parts in the fastener discharge area of the tool. The tool might eject a fastener and could result in death or serious personal injury. Never carry the tool by the air hose or pull the hose to move the tool or a compressor. Keep hoses away from heat, oil and sharp edges. Replace any hose that is damaged, weak or worn. Personal injury or tool damage could occur. Always assume the tool contains fasteners. Respect the tool as a working implement; no horseplay. Always keep others at a safe distance from the work area in case of accidental discharge of fasteners. Do not point the tool toward yourself or anyone whether it contains fasteners or not. Accidental triggering of the tool could result in death or serious personal injury. Do not drive a fastener on top of other fasteners. The fastener could glance and cause death or a serious puncture wound. Do not operate or allow anyone else to operate the tool if any warnings or warning labels are not legible. Warnings or warning labels are located on the tool magazine and body. Do not drop or throw the tool. Dropping or throwing the tool can result in damage that will make the tool unusable or unsafe. If the tool has been dropped or thrown, examine the tool closely for bent, cracked or broken parts and air leaks. STOP and repair before using or serious injury could occur. Always check that the Work Contact Element (WCE) is operating properly. A fastener could accidentally be driven if the WCE is not working properly. Personal injury may occur (See "Checking the Work Contact Element" Section). Avoid using the tool when the magazine is empty. Accelerated wear on the tool may occur. Always remain in a firmly balanced position when using or handling the tool. Avoid long extended periods of work with the tool. Stop using the tool if you feel pain in hands or arms. Tool Use and Care a. Use clamps or another practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against the body is unstable and is able to lead to loss of control. b. Do not force the tool. Use the correct tool for the application. The correct tool will do the job better and safer at the rate for which the tool is designed. c. Do not use the tool if the switch does not turn the ...