valutazioni - 3, GPA: 4
(
)
)
|
Facilità d'uso
2 For Sears warranty information or to contact a Sears Service Electrical Requirements .......................................... 3 Center, call 1-800-4-my-HOME (1-800-469-4663) Exhaust System Requirements ............................ 3-4 If you need SERVICE or PARTS for your Kenmore Gas Supply Requirements ....................................... 4 Rough-In Dimensions.............................................. 5 coin-operated washer: be ready to give the model Unpacking ................................................................ 5 number, serial number and date of purchase. Record Reversing Door Swing ............................................. 5 below. Location of Your Dryer ............................................. 6 Electrical Installation ............................................... 7 Modelnumber Grounding Requirements ........................................ 7 Electrical Connections--3-wire .............................. 8 Serialnumber Electrical Connections--4-wire .............................. 8 Installation ................................................................ 9 Purchase date Lint Blade Retaining Pin Location ........................... 9 Metercase instructions ...................................... 9-12 Record Coin Box Replacement Parts ................................................. 12 Key Number Parts lists ......................................................... 13-14 Warranty ............................................................... 15 Key number is on key and/or coin box. Back Cover ........................................................... 16 .................................................................................................................................................................................................................................................................................................................................................................................................................................................................................. )] DRYER SAFETY Before beginning installation, carefully read these instructions. This will simpfify the installation and ensure the dryer is installed correctly and safely. Leave these instructions near the Dryer after installation for future reference. NOTE: The electrical service to the Dryer must conform with local codes and ordinances and the latest edition of the National Electrical Code, ANSI/NFPA 70. NOTE: The gas service to the Dryer must conform with local codes and ordinances and the latest edition of the National Fuel Gas Code ANSI Z223.1. Your safety and the safety of others is very important. We have provided many important safety messages in the Installation Instructions / Use & Care Guide and on your appliance. Always read and obey all safety messages. _This isthesafetyalertsymbol.Thissymbolalertsyoutohazardsthat cankill orhurtyouorothers. Allsafetymessageswill be preceded by the safety alert symbol and the word "DANGER" or "WARNING" These words mean: You can be killed or seriously injured if you don't immediately follow instructions. You can be killed or seriously injured if you don't follow instructions. All safety messages will identify the hazard, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed. For your safety the information in this manual must be followed to minimize the risk of fire or explosion or to prevent property damage, personal injury or lossof life. -Do not store or use gasoline or other flammable vapors and liquid in the vicinity of this or any other appliance. - WHAT TO DO IF YOU SMELL GAS • Do not try to light any appliance. • Do not touch any electrical switch; do not use any phone in your building. • Clear the room, building or area of all occupants. Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's instructions. If you cannot reach your gas supplier, call the fire department. Installations must be performed by a qualified or licensed contractor, plumber, or gasfitter qualified or licensed by the state, province, or region where this appliance is being installed. PRE-INSTALLATION REQUIREMENTS Tools and Materials Required for Installation: 1. Phillips head screwdriver. 6. Rigid or flexible metal 4 inch (10.2 cm) duct. 2. Channel-lock adjustable pliers. 7. Vent hood. 3. Carpenter's level. 8. Pipe thread sealer (Gas). 4. Flat or straight blade screwdriver. 9. Plastic knife. S. Duct tape. ELECTRICAL REQUIREMENTS [ ELECTR/CDryer CIRCUIT-Individual 30 amp. branch circuit fused with 30 amp. time delay fuses or circuit breakers. Use separately fused circuits for washers and dryers, and DO NOToperate a washer and a dryer on the same circuit. POWER SUPPLY -3 wire, 240 volt, single phase, 60 Hz, Alternating Current. POWER SUPPLY CORD KIT -The dryer MUST employ a 3conductor power supply cord NEMA 10-30 type SRDT rated at 240 volt AC min...
Questo manuale è adatto anche per i modelli :essiccatori - 134316200 (2.69 mb)
essiccatori - 417.74182300 (2.69 mb)