valutazioni - 2, GPA: 4
(
)
)
|
Facilità d'uso
Open the screen and clean off the dust on the screen with a wet towel. After cleaning, put the screen back in place. 3. Emptying the water collection box During operation , steam condenses into water and is collected in the box.The box must be emptied after the program is complete. -Hold the handle and pull the box outwards to remove it. keep it level to prevent the water from overflowing; -Pour away water. Note: the water can not be used for drink or for food processing; -Put the box back in place.If the box has not been emptied, the dryer will sound an alarm when the box is full. The indicator light comes on while the box is emptied and the dryer will stop. It will not restart until the box is emptied. 4.Cleaning the condenser The condenser must be cleaned monthly. Switch off the power supply before cleaning. -Hold the protrusions on both sides of the lower deco panel and open it. 13 -Using a coin or other tool, push the slides on the cover to the position as shown in the figure and then remove the cover; -Turn the condenser's handle 90 degrees in the direction as shown in the figure; -Remove the condenser from the dryer; -Clean the condenser with a brush or flush with by a water jet; Note: Do not use a sharp tool in cleaning the heat exchanger, otherwise it may damage its sealing performance; -Put the condenser back in place and lock up the cover; -Put the lower deco panel back in place. 5. Cleaning the drum After the dryer has operated for a time, fabric caring agents or calcium contained in the water will form an almost invisible layer on the inside of the drum. This makes the dryer not able to reliably and accurately identify the dryness of the laundry. So the inside of the drum, especially the stainless steel pieces on the blades must be cleaned regularly by a wet cloth. B C D A Cleaning and Maintenance Cleaning and Maintenance Trouble Shooting Trouble Shooting Prompt and Alarm Information In case of an improper operation or trouble with the machine when it operates, the code corresponding to the trouble will be displayed on the screen: 14The following must be confirmed before calling for service: Problem The dryer does not start Possible Cause . Is the power supply plugged in and switched on. . Plug another appliance into the wall socket to test if there is power. . Check if a drying program has been set; . the Start/Pause button has been pressed; . The water collection box is full; The drying result is not good and the drying time is too long. .Is the drying program setting correct; .Has the filter screen been cleaned ; .Is the condenser blocked; . Does the amount of the loaded laundry exceed the rated load; . Has the loaded laundry been spun dry; .Is the vent duct blocked; . Has the surface of the inside of the drum got a deposit layer forming, if so clean the drum interior; The remaining time display is halted, or the remaining time displayed is skipping The remaining time will be adjusted and corrected continuously and automatically b...
Questo manuale è adatto anche per i modelli :essiccatori - HDY-D70-E (2.15 mb)
essiccatori - HDY-D70-E (2.15 mb)
essiccatori - HDY-D70-E (2.15 mb)
essiccatori - HDY-D70-E (2.15 mb)