valutazioni - 3, GPA: 4.3
(
)
)
|
Facilità d'uso
as of February 1992) American Dryer Corporation 88 Currant Road Fall River MA 02720-4781 Telephone: (508) 678-9000/ Fax: (508) 678-9447 E-mail: techsupport@amdiy.com 070993 ADC Part No. 450108 Retain This Manual In A Safe Place For Future Reference American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, and trouble-free operation. ONLY properly licensed technicians should service this equipment. OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation/operator’s manual included with the dryer. WARNING: UNDER NO CIRCUMSTANCES should the door switch or the heat circuit devices ever be disabled. WARNING: The dryer must never be operated with any of the back guards, outer tops, or service panels removed. PERSONAL INJURY or FIRE COULD RESULT. We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make changes from time to time, without notice or obligation, in prices, specifications,colors, and material, and to change or discontinue models. Important For your convenience, log the following information: DATE OF PURCHASE _ MDDELNQ _ DISTRIBUTORS NAME _ Serial Number(s) _ Replacement parts can be obtained from your distributor or the ADC factory. When ordering replacement parts from the factory, you can FAX your order to ADC at (508) 678-9447 or telephone your orders directly to the ADC Parts Department at (508) 678-9000. Please specify the dryer model number and serial number in addition to the description and part number, so that your order is processed accurately and promptly. The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering. “IMPORTANT NOTE TO PURCHASER” Information must be obtained from your local gas supplier on the instructions to be followed if the user smells gas. These instructions must be posted in a prominent location near the dryer. IMPORTANT YOU MUST DISCONNECT and LOCKOUT THE ELECTRIC SUPPLY and THE GAS SUPPLY BEFORE ANY COVERS or GUARDS ARE REMOVED FROM THE MACHINE TO ALLOW ACCESS FOR CLEANING, ADJUSTING, INSTALLATION, or TESTING OF ANY EQUIPMENT per OSHA (Occupational Safety and Health Administration) STANDARDS. FOR YOUR SAFETY DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPORS AND LIQUIDS IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE. DO NOT DRY MOP HEADS IN THE DRYER. DO NOT USE DRYER IN THE PRESENCE OF DRY CLEANING FUMES. WARNING CHILDREN SHOULD NOT BE ALLOWED TO PLAY ON OR IN THE DRYER(S). CHILDREN SHOULD BE SUPERVISED IF NEAR DRYER(S) IN OPERATION. CAUTION DRYER(S) SHOULD NEVER BE LEFT UNATTENDED WHILE IN OPERATION. IMPORTANT Please observe all safety precautions displayed on the equipment and/or specified in the installation/operators manual included with the dryer. Dryer(s) must not be installed or stored in an area where it will be exposed to water and/or weather. The wiring diagram for the dryer is located in the front electrical control box area. Table Of Contents Section I Important Information .................................................................................................... 2 A. Safety Precautions.................................................................................................................................... 2 Section II Maintenance ...................................................................................................................... 3 A. Cleaning..................................................................................................................................................... 3 B. Adjustments............................................................................................................................................... 4 C. Lubrication................................................................................................................................................. Section III Installation Requirements .............................................................................................. 5 A. Enclosure, Air Supply, and Exhaust Requirements............................................................................ 5 B. Electrical and Gas Requirements............................................................................................................ 6 C. Operational Service Check Procedure................................................................................................... 6 Section IV Description of Parts ......................................................................................................... 8 A. Control Panel (Microprocessor)............................................................................