valutazioni - 3, GPA: 4.7
(
)
)
|
Facilità d'uso
•Time programs: For additional drying or for drying loads of less than 1 kg. • Program EASY IRON (STRIJKVRIJ): Special drying program with anti- crease mechanism for easy-care fabrics; maximum load 1kg. •Program WOOL (WOL): To freshen up woollen fabrics after they have been line dried; maximum load 1 kg. • REFRESHING (OPFRISSEN) programme for optimum results when refreshing items of clothing and gently cleaning textiles with the aid of commercially available dry-cleaning products (please follow the manufacturer’s instructions for use); Programme duration: 35 minutes; maximum load 1 kg. Before using the appliance for the first time 0 Wipe out the drum using a damp cloth or else insert damp cloths and carry out a short drying procedure (20 mins.). Brief instructions Brief instructions • Ensure the laundry is well spun before tumble drying. • Prepare the laundry. • Open the door and insert washing. • Shut the door. Attention! Do not catch washing in the door. • Select the drying program – on the program selector. – If required press the buttons SPECIAL CARE (LAGE TEMPERATUUR), AUDIBLE SIGNAL (ZOEMER). • Start the program by pressing the START/PAUSE (START/PAUZE)-button. While the program is running you can open the door to take-out laundry or add more laundry. At the end of the program (END/CREASE GUARD (EINDE/ANTI-KREUK) display is illuminated, acoustic signal is sounded, if set, the anti-crease phase begins): • Remove the laundry. • Empty the water reservoir. • Clean the fluff filter. If the indicator CONDENSER (WARMTEWISSELAR) is highlighted: • It is essential to clean the condenser! • Switch-off the dryer by turning the programme selector to the OFF (UIT) position. Drying Drying Prepare the laundry • To prevent tangled bundles of laundry: Close zip fasteners; button-up bed linen and pillow cases; tie-together loose tapes, e.g. aprons. • Empty all pockets. • Remove all metal objects (paper clips, pins, etc.). • Turn clothing consisting of double-layer fabric inside out (such as cotton-lined anoraks with the cotton layer facing outwards). The fabrics will dry better. • Loosen the laundry. Open the door To open the door: • Press firmly against the door (Press position ). Load the laundry • Load the prepared laundry into the dryer. Closing the door Closing the door: • apply pressure to the door until it clicks audibly into place. 1 Caution! Ensure the laundry does not get caught in the door when the door is closed! This could damage the laundry! Select the drying program 0 Select the suitable drying program using the program selector (see "Program tables"). Drying 0 If required, select the button SPECIAL CARE (LAGE TEMPERATUUR), AUDIBLE SIGNAL (ZOEMER). • SPECIAL CARE (LAGE TEMPERATUUR) button This program operates with reduced heat. Press the SPECIAL CARE (LAGE TEMPERATUUR) button for fabrics bearing the care symbol S. Gentle drying is advisable for heat-sensitive fabrics (such as acrylic and viscose). • AUDIBLE SIGNAL (ZOEMER) button During the crease-protection phase (immediately after the drying process), an acoustic signal is sounded at certain intervals (see "End of drying process"). Drying Start the drying program 0 Press the button START/PAUSE (START/PAUZE ). The drying programme begins. You can check the progress of the drying procedure in the programme progress display. Removing laundry or loading laundry when necessary You can interrupt the drying process at any time to remove some of the laundry or to add more laundry. 0 Open the door. 1 Caution! The laundry and the drum may be hot. 0 Remove or add more laundry. 0 Close the door. 0 Press the START/PAUSE (START/PAUZE ) button to resume the drying process. End of the drying process The cooling phase starts shortly before the end of the drying process: The heater is switched-off during this phase. After the cooling phase the END/CREASE GUARD (EINDE/ANTI-KREUK) display is illuminated. You can now remove the washing from the tumble dryer. The crease guard phase follows automatically after the drying process. For 30 minutes the drum rotates intermittently. This keeps your laundry loose and crease-free. If you have pressed the AUDIBLE SIGNAL (ZOEMER) button, an acoustic signal is sounded intermittently during this phase. You should remove the washing at the latest towards the end of the anti-crease phase to avoid creasing. Removing the laundry 0 Open the door and remove the laundry. Drying Empty the water reservoir 1 Caution! The condensed water is not suitable for drinking or for use with foodstuffs. The water reservoir should be emptied after every drying programme. This avoids interruption of a programme when the water reservoir is full. 0 Grasp the handle flap of the water reservoir and pull-out completely. 0 Push the cover of the water reservoir to the side and pour-out the condensed water. 0 Re-insert the water reservoir into the control panel. If the drying cycle has not yet ended: 0 Press the START/PAUSE (START/PAUZE) button to resume the drying p...
Questo manuale è adatto anche per i modelli :essiccatori - LAVATHERM 57320 (453.78 kb)
essiccatori - LAVATHERM 57320 (453.78 kb)
essiccatori - LAVATHERM 57320 (453.78 kb)