However other applications such as Fiber-To-The-Home (FTTH), etc, require a small un-obtrusive mounting option that can be discretely placed on a wall or under a table top. The AT-WLMT was designed to meet this demand. Simple Installation Each AT-WLMT has two circular holes and two ‘key’ slots on the base.The use of the circular holes allows two countersunk screws to mount the bracket on a horizontal surface underneath a table top, whilst the two key slots allow the bracket to be easily wall-m

The AT-RPS3204 is shipped with one AT-PWR3202 Power Supply installed in slot A1, which can supply power for one switch. The AT-RPS3204 can accommodate up to three additional AT-PWR3202 Power Supplies, supplying redundant power for a total of four Allied Telesis switches. Verifying Package Contents Verify that the correct components are included in your package: • AT-RPS3204 Redundant Power Supply • Two rack-mount brackets • 12 rack-mount bracket screws • Two AC power cords • Two power cord retai

. 18 ADVARSEL: Ved installering af dette udstyr skal steljord altid forbindes forst og aftages sidst. Translated Safety and Emission Information . 19 FORSIKTIG: “Fare” Se omhyggeligt efter om der stikker blanke kobbertrade ud fra klemmeforbindelserne. Ved korrekt montering er det ikke tilf.ldet. Enhver afisoleret leder kan lede farlig stromstyrke til personer, som kommer til at rore ved dem. AT-FS238a/x and AT-FS238b/x Series Installation Guide Eisen: Dit product voldoet aan de volgende eisen. .

Installing the Bridging Converter DIP SWITCHES Negative Positive Ground Figure 9 Positive, Ground, and Negative Symbols Warning The power input must be provided from SELV source only, per IEC 60950. Do not connect to centralized DC battery bank. 3. Secure the power supply cable in the Restricted Access Area using multiple cable ties to minimize the chance of the connections being disturbed by casual contact with the wiring. Warning "Safety Hazard"- Check to see if there are any exposed copper st

960 Stewart Drive, Suite B, Sunnyvale, CA 94085, USA All rights reserved. No part of this publication may be reproduced without prior written permission from Allied Telesyn, Inc. Ethernet is a registered trademark of Xerox Corporation. All other product names, company names, logos or other designations mentioned herein are trademarks or registered trademarks of their respective owners. Allied Telesyn, Inc. reserves the right to make changes in specifications and other information contained in th

External power adapter (depending on the model) . For use on a desktop or in an AT-MCR12 chassis Overview Status LEDs Table 2 defines the LEDs for the bridging converters. Table 2 Status LEDs LED Color Description PWR Green Power is applied to the unit. AUTO NEG Green OFF Auto-negotiation on the twisted pair port is enabled. Auto-negotiation on the twisted pair port is disabled. 100M Green OFF The twisted pair port is operating at 100 Mbps. The twisted pair port is operating at 10 Mbps. LNK Gree