valutazioni - 2, GPA: 5
(
)
)
|
Facilità d'uso
(The displayed time ing, playback, or fast-forward, the tape will auto- will not change on a blank tape or blank portions on matically rewind to the beginning. After rewinding the tape.)The “–” indication will appear when the finishes, the TV/VCR will eject the tape and turn tape has rewound further than “0:00:00” on the tape itself to off. counter. • This function is operative when Repeat Play is set to the [OFF] position. • The tape will not auto-rewind during timer recording or One Touch Recording. MAINTENANCE CABINET CLEANING • Wipe the front panel and other exterior surfaces of the TV/VCR with a soft cloth immersed in lukewarm water and wrung dry. • Never use a solvent or alcohol. Do not spray insecticide liquid near the TV/VCR. Such chemicals may cause damage and discoloration to the exposed surfaces. AUTO HEAD CLEANING • Automatically cleans video heads as you insert or remove a cassette, so you can see a clear picture. • Playback picture may become blurred of interrupted while the TV program reception is clear. Dirt accumulated on the video heads after long periods of use, or the usage of rental or worn tapes can cause this problem. If a streaky or snowy picture appears during playback, the video heads in your TV/VCR may need to be cleaned. 1.Please visit your local Audio/Video store and purchase a good quality VHS Video Head Cleaner. 2.If a Video Head Cleaner does not solve the problem, please call our help line at 1-800-256-2487, to locate an Authorized Service Center. NOTES: • Remember to read the instructions included with the video head cleaner before use. • Clean video heads only when problems occur. SERVICING • Should your TV/VCR become inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts inside. Turn off, unplug the power cord, and please call our help line at 1-800256- 2487, to locate an Authorized Service Center. - 24-EN 9J27 TROUBLESHOOTING GUIDE If you have followed the instructions contained in this manual and have difficulty in operating your TV/VCR, locate the PROBLEM in the left column below. Check the corresponding CORRECTIVE ACTION column to remedy the problem. PROBLEM CORRECTIVE ACTION No power. • Make sure the AC cord is connected to an AC outlet. • Make sure the car battery cord is connected to vehicle’s cigarette lighter socket and to DC 13.2V (12V) jack on back of the TV/VCR. • Check the fuse (5A, 250V) in car battery cord. • Make sure the power is turned on. No picture and sound. • Make sure the AC cord is connected to an AC outlet. • Check antenna connection. • Let the TV/VCR program its tuner memory. No picture or poor picture on TV/VCR. • Adjust direction or replace antenna. • Adjust picture controls. No sound or poor sound. • Adjust volume control on remote control or main unit. • Press the MUTE button to restore sound. Timer recording is not possible. • Make sure the timer recording is set correctly. • Make sure the power is off. • Make sure the TV/VCR clock is set correctly. Cannot go into Record mode. • Make sure the tape has an erase-prevention tab. If need, cover the hole with plastic tape. Playback picture is partially noisy. • Adjust tracking control for a better picture using the CHANNEL K or L button on the TV/VCR. No picture but the audio is OK in playback. • Head cleaning may be necessary. Refer to “AUTO HEAD CLEANING” on page 24. No operation by infrared Remote Control. • Make sure the AC cord is connected to an AC outlet. • Check batteries in remote control. Video or color fades in and out when making a copy of a video tape. • You can not copy a copyrighted video tape. You are experiencing copy guard protection. Can not set the auto clock to ON. • Make sure the AC cord is connected to an AC outlet. Blotted or unlevelled color on the screen • Disconnect power cord from AC outlet once, then reconnect it after 30 minutes. Different color marks on screen. • Magnetism from nearby appliances and geomagnetism might affect the color of the TV picture. Move the TV/VCR away from the appliances, the TV/VCR can repair itself automatically. If you want to repair immediately, unplug the TV/VCR power cord, then plug it in again 30 minutes or so later. - 25-EN 9J27 SPECIFICATIONS GENERAL SPECIFICATIONS CRT : 9 inch in-line gun, 90° deflection tube Television system : NTSC-M Video Heads : Rotary two-head Tape width : 1/2 inch Tape speed SP : 33.40mm/sec. LP : 16.67mm/sec. SLP : 11.12mm/sec. Tuner channel TV VHF Low : #2~#6 TV VHF High : #7~#13 TV UHF : #14~#69 CATV VHF : 5A MID band : A5~A1, A~I SUPER band : J~W HYPER band : W+1~W+84 Terminals Antenna input : VHF/UHF 75 ohms unbalanced Video input : RCA connector [ 1 Audio input : RCA connector [ 1 Earphone : 1/8” monaural (3.5 mm) ELECTRICAL SPECIFICATIONS Video input level : 0.5~2.0Vp-p Audio input level : -15dBs Video S/N ratio : More than 46dB Audio S/N ratio : More than 43dB OTHER SPECIFICATIONS Power requirement : AC 120V/60Hz DC 13.2V (12V) Power consumption : AC 55W / DC 60W ...