valutazioni - 4, GPA: 3.8 ( )

Produttore : Sony File Size : 11.52 mb File Nome : Lingua di insegnamento:

“Pitch”: Enlarges or shrinkes the screen size horizontally. “H Centre”: Moves the screen to the left or to the right. “V Lines”: Corrects the picture lines while viewing an RGB input signal from the PC -Q connector. “Power saving”: Turns to standby mode if no PC signal is received. “Reset”: Resets to the factory settings. Timer Sets the timer to turn on/off the TV. Sleep Timer Sets a period of time after which the TV automatically switches itself into standby mode. When the Sleep Timer is activated, the & (Timer) indicator on the TV (front) lights up in orange. z • If you switch off the TV and switch it on again, “Sleep Timer” is reset to “Off’. • “Sleep timer will end soon. Power will be turned off’ appears on the screen one minute before the TV switches to standby mode. Clock Set Allows you to adjust the clock manually. When the TV is receiving digital channels, the clock cannot be adjusted manually since it is set to the time code of the broadcasted signal. Timer Sets the timer to turn on/off the TV. “Timer Mode”: Selects the desired period. “On Time”: Sets the time to turn on the TV. “Off Time”: Sets the time to turn off the TV. 26 GB Set-up menu Set-up EÜ Auto Start Up ► Language English Auto Tuning Programme Sorting AV Preset — HDMI Set-up Sound Offset Manual Programme Preset Digital Set-up Back: + Select: ♦ + Enter: Ö Exit: menu You can select the options listed below on the Set-up menu. To select options in “Settings”, see “Navigating through menus” (page 20). Auto Start Up Starts the “first time operation menu” to select the language, country/region and location, and tune in all available digital and analogue channels. Usually, you do not need to do this operation because the language and country/region will have been selected and channels already tuned when the TV was first installed (page 7). However, this option allows you to repeat the process (e.g., to retune the TV after moving house, or to search for new channels that have been launched by broadcasters). Language Selects the language in which the menus are displayed. Auto Tuning Tunes in all the available analogue channels. Usually you do not need to do this operation because the channels are already tuned when the TV was first installed (page 7). However, this option allows you to repeat the process (e.g., to retune the TV after moving house, or to search for new channels that have been launched by broadcasters). Programme Sorting Changes the order in which the analogue channels are stored on the TV. 1 Press F/f to select the channel you want to move to a new position, then press g. 2 Press F/f to select the new position for your channel, then press © . AV Preset Assigns a name to any equipment connected to the side and rear sockets. The name will be displayed briefly on the screen when the equipment is selected. You can skip an input source that is not connected to any equipment. 1 Press F/f to select the desired input source, then press © . 2 Press F/f to select the desired option below, then press © . • AV1 (or AV2/ AV3/ AV4/AV5/AV6/ PC), VIDEO, DVD, CABLE, GAME, CAM, SAT: Uses one of the preset labels to assign a name to connected equipment. • “Edit”: Creates your own label. 1 Press F/f to select the desired letter or number (“_” for a blank space), then press g. If you input a wrong character Press G/g to select the wrong character. Then, press F/f to select the correct character. 2 Repeat the procedure in step 1 until the name is completed. 3 Select “OK”, then press ©. • “Skip”: Skips an input source that is not connected to any equipment when you press F/f to select the input source. Continued 27 GB Using MENU Functions HDMI Set-up This is used to set the HDMI control compatible equipment connected to the HDMI sockets. Note that the interlock setting must also be made on the connected HDMI control compatible equipment side. “HDMI Control”: This sets whether to interlock the HDMI control compatible equipment and the TV. When set to “On”, the following menu items can be performed. “Auto Devices Off”: When this is set to “On”, the HDMI control compatible equipment turn on and off interlocked with the TV. “Auto TV On”: When this is set to “On”, the TV turns on interlocked with the HDMI control compatible equipment. “Device List Update”: Creates or updates the “HDMI Device List”. Up to 11 HDMI control compatible equipment can be connected, and up to 5 equipment can be connected to a single socket. Be sure to update the “HDMI Device List” when you change the HDMI control compatible equipment connections or settings. “HDMI Device List”: Displays the connected HDMI control compatible equipments. Sound Offset Sets an independent volume level to each equipment connected to the TV. Manual Programme Before selecting “Label”/“AFT”/“Audio Filter”/“Skip”/“Decoder”, press F/f to Preset select the programme number you want to modify. Then, press 0 . System Presets programme channe...

Scarica la tua

Per scaricare, digitare 2 cifre :