valutazioni - 2, GPA: 4
(
)
)
|
Foto e specifiche Sony KDL-52X2000 |
da questo dispositivo ha anche altre istruzioni :
TV - KDL-52X2000 (1.24 mb)
TV - KDL-52X2000 (23.17 mb)
Facilità d'uso
When the TV is receiving digital channels, the clock cannot be adjusted manually since it is set to the time code of the broadcasted signal. Auto Start-up Starts the “first time operation menu” to select the language and country/region, tune in all available digital and analogue channels, and set the time (only when no digital channels are received). Usually, you do not need to do this operation because the language and country/region will have been selected and channels already tuned when the TV was first installed (page 6, 7). However, this option allows you to repeat the process (e.g. to retune the TV after moving house, or to search for new channels that have been launched by broadcasters). Power Saving Selects the power saving mode to reduce the power consumption of the TV. When “Picture Off’ is selected, the picture is switched off and the (Picture Off) indicator on the TV (front) lights up in green. The sound remains unchanged. Continued 31 GB Using MENU Functions Film Mode Provides smoother picture movement when playing DVD or VCR images taken on film, reducing picture blur and graininess. “Auto 1”: For a stable picture with minimal noise. Set to “Auto 2” if the screen is partially degraded. “Auto 2”: Use this setting for standard use. “Off”: Turns off the Film mode. Notes • Even if “Auto 1” or “Auto 2” is selected, “Film Mode” will be automatically turned off and a moving image will not be played smoothly if the image contains irregular signals or too much noise. • Film Mode is not available when using Freeze or PAP features, or when watching 480p, 576p, 720p or 1080p sources. 0 Volume (headphone volume) Adjusts the volume of the headphones when “0 Speaker Link” is set to “Off’. 0 Speaker Link (headphone speaker link) Switches the TV’s internal speakers on/off when headphones are connected. “On”: Sound is output only from headphones. “Off’: Sound is output from both the TV and headphones. Speaker Switches on/off the TV’s internal speakers. “On”: The TV speakers are turned on in order to listen to the TV’s sound through the TV speakers. “Off”: The TV speakers are turned off in order to listen to the TV’s sound only through your external audio equipment connected to the audio output sockets. Audio Out “Variable”: The audio output from your audio system can be controlled by the TV’s remote. “Fixed”: The audio output of the TV is fixed. Use your audio receiver’s volume control to adjust the volume (and other audio settings) through your audio system. Light Sensor “On”: Automatically optimizes the picture settings according to the ambient light in the room. “Off’: Turns off the “Light Sensor” feature. Note Be sure not to put anything over the sensor, as its function may be affected. See page 15 for further information on the sensor. Logo Illumination Lights up and turns off the Sony logo on the front of the TV. Language Selects the language in which the menus are displayed. Information Displays your TV’s product information. All Reset Resets all settings to the factory settings and then displays the Auto Start-up screen. Note All settings, including Digital Favourite list, country, language, auto tuned channels, etc. will be reset. 32 GB AV Set-up menu You can select the options listed below on the AV Setup menu. To select options in “Settings”, refer to “Picture menu” (page 24). I ^ m AV Preset Assigns a name to any equipment connected to the side and rear sockets. The name will be displayed briefly on the screen when the equipment is selected. You can skip input signals from connected equipment that you do not want displayed on the screen. 1 Press F/f to select the desired input source, then press ©. 2 Press F/f to select the desired option below, then press ©. Equipment labels: Uses one of the preset labels to assign a name to connected equipment. “Edit”: Creates your own label. Follow steps 2 to 4 of “Programme Labels” (page 35). “Skip”: Skips an unnecessary input source. AV7 Input “Auto”: Switches automatically between the component video sockets, S Video socket, and the composite video sockets on the left side of the TV depending on the cable connection. “Component”: Activates the component video sockets on the left side of the TV. “S Video”: Activates the S Video socket on the left side of the TV. “Composite”: Activates the composite video sockets on the left side of the TV. Tip When multiple cables are connected and “Auto” is selected, “Component”, “S Video”, “Composite” will be activated in that order. AV2 Output Sets a signal to be output through the socket labelled ('♦t»/^-"12 on the rear of the TV. If you connect a VCR or other recording equipment to the f«7»7^---)2 socket, you can then record from the equipment connected to other sockets of the TV. “TV”: Outputs a broadcast. “AV1”: Outputs signals from equipment connected to the @*•^^31 socket. “AV3”: Outputs signals from equipment connected to the C*7*/^--l3 socket. “AV7”: Outputs signals from equipment conn...
Questo manuale è adatto anche per i modelli :TV - KDL-40X2000 (17.57 mb)
TV - KDL-46X2000 (17.57 mb)