valutazioni - 6, GPA: 3.5
(
)
)
|
Facilità d'uso
. (All resolutions between the supported limits are supported) Mode Resolution Horizontal Vertical Pixel Clock Sync Polarity Frequency (kHz) Frequency (Hz) Frequency (MHz) (H/V) VGA LW15M2/ 720X400 31.469 70.0B7 28.322 - / + LW17M2/ 640X4B0 31.469 59.940 25.175 - / - LW20M2 VGA LW15M2/ 640X4B0 37.500 75.000 31.500 - / - LW17M2/ LW20M2 SVGA LW15M2/ B00X600 46.875 75.000 49.500 + / + LW17M2/ B00X600 37.879 60.317 40.000 + / + LW20M2 XGA LW15M2/ 1024X76B 48.363 60.004 65.000 - / - LW17M2 1024X76B 60.023 75.029 78.750 + / + SXGA LW17M2 12B0X1024 63.981 60.020 108.000 +,- / -,+ 12B0X1024 79.976 75.025 135.000 + / + ^ The interlace mode is not supported. ^ The set might operate abnormally if a non-standard video format is selected. English-1B Setting the PC Coarse and Fine Tuning of the Image (Image Lock): The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (coarse) and Fine-tune again. After the noise has been reduced, re-adjust the picture so that it is aligned on the center of screen. Preset: Press the SOURCE button to select PC mode. Press the MENU button to display the menu. Press the ^ or ▼ button to select “Setup”, then press the ENTER® button. Press the ^ or ▼ button to select “PC”, then press the ENTER® button. Press the ENTER® button to select “Image Lock”. Press the ^ or ▼ button to select “Coarse” or “Fine”, then press the ENTER® button. 6. Press the 4 or ► button to adjust the screen quality. Press the ENTER® button. 7. Press the EXIT button to exit. Changing the Image Position (Position): Adjust the PC’s screen positioning if it does not fit the TV screen. Follow the “Coarse and Fine Tuning of the Image (Image Lock)” instructions number 1 to 3. Press the ^ or ▼ button to select “Position”, then press the ENTER® button. Press the ^ or ▼ button to adjusting the Vertical-Position. Press the 4 or ► button to adjust the Horizontal-Position. Press the ENTER® button. 4. Press the EXIT button to exit. 3. 1 PC 1 w ffl 1 Imago Lock Position 1 4) Auto Adjustment % Mm \ îm™ [SEntar HDRatum | Initializing the Image Settings (Image Reset): You can replace all image settings with the factory default values. 1. Follow the “Coarse and Fine Tuning of the Image (Image Lock)” instructions number 1 to 3. 2. Press the ^ or ▼ button to select “Image Reset”, then press the ENTER® button. 3. Press the EXIT button to exit. Adjusting the PC Screen Automatically (Auto Adjustment): Auto adjustment allows the PC screen of set to self-adjust to the incoming PC video signal. The values of fine, coarse and position are adjusted automatically. 1. Follow the “Coarse and Fine Tuning of the Image (Image Lock)” instructions number 1 to 3. 2. Press the ^ or ▼ button to select “Auto Adjustment”, then press the ENTER® button. 3. Press the EXIT button to exit. English-19 RECOMMENDATIONS FOR USE Troubleshooting: Before Contacting Service Personnel No sound or picture ♦ Check that the mains lead has been connected to a wall socket. ♦ Check that you have pressed the POWER O buttons on the lower-right panel. ♦ Check the picture contrast and brightness settings. ♦ Check the volume. Normal picture but no sound ♦ Check the volume. ♦ Check whether the MUTE ^ button has been pressed on the remote control. No picture or black and white picture ♦ Adjust the colour settings. ♦ Check that the broadcast system selected is correct. Sound and picture interference ♦ Try to identify the electrical appliance that is affecting the set and move it further away. ♦ Plug your set into a different mains socket. Blurred or snowy picture, distorted sound ♦ Check the direction, location and connections of your aerial. This interference is often due to the use of an indoor aerial. Remote control malfunctions ♦ Replace the remote control batteries. ♦ Clean the upper edge of the remote control (transmission window). ♦ Check the battery terminals. “Check signal cable.” message is displayed. ♦ Check that the signal cable is firmly connected to the PC or video sources. ♦ Check that the PC or video sources are turned on. On PC mode, “Not Supported Mode.” message is displayed. ♦ Check the maximum resolution and the frequency of the video adaptor. ♦ Compare these values with the data in the Display Modes. The TFT LCD panel uses a panel consisting of sub pixels (LW15M2 - 2,359,296, LW17M2 - 3,932,160, LW20M2 - LW20M21CP: 921,600 / LW20M22CP: 1,440,000) which require sophisticated technology to produce. However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product. Technical and Environmental Specifications Model Name LW15M2 LW17M2 LW20M2 Panel Size Display Size Pixel Pitch 15” Diagonal (4:3) 304.1 (H) x 228.1 (V) mm 0.297 (H) x 0.297 (V) mm 17” Diagonal (4:3)...
Questo manuale è adatto anche per i modelli :TV - LW17M2 (56.3 mb)
TV - LW20M2 (56.3 mb)
TV - LW15M23CP (56.24 mb)