Log:
valutazioni - 3, GPA: 3.7 ( )

Istruzioni per l'uso Samsung, Modello UE37C6540S

Produttore : Samsung
File Size : 36.16 mb
File Nome :
Lingua di insegnamento: ruukentrbgid
Vai a scaricare



Facilità d'uso


If the channel set for the wireless IP sharer is currently being used by another device nearby, this will result in interference and communication failure. • If you apply a security system other than the systems listed below, it will not work with the TV, • If Pure High-throughput (Greenfield) 802.11N mode is selected and the Encryption type is set to WEP, TKIP or TKIP-AES (WPS2Mixed) for your AP, Samsung TVs will not support a connection in compliance with new Wi-Fi certification specifications. • If your AP supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button Configuration) or PIN (Personal Identification Number). WPS will automatically configure the SSID and WPA key in either mode. • If your router, modem, or device isn’t certified, it may not connect to the TV via the "Samsung Wireless LAN Adapter." • Connection Methods: You can setup the wireless network connection six ways. - Samsung Auto Configuration - PBC (WPS) - Auto Setup (Using the Auto Network Search function) - Manual Setup - SWL(Samsung Wireless Link) - Ad-Hoc • The Samsung Wireless LAN Adapter may not be recognized or work properly when connecting via a USB hub or via a USB extension cable other than the one available from Samsung. English 27 04 Advanced Features Advanced Features Notice The picture may appear corrupted or have static for some channels when the TV is connected to the Samsung Wireless LAN Adapter. In such a case, establish a connection using one of the following methods or connect the Samsung Wireless LAN Adapter using a USB cable in a place that is not affected by radio interference. Method 1 Method 2 Connect using the USB right angle adapter Connect via an extension cable ^ The Samsung Wireless LAN Adapter should be installed in an interference-free area in order to avoid interference between the adapter and tuner. Network Setup (Samsung Auto Configuration) This function is available in APs (Access Points) that support Auto Configuration. If your AP does not, you can connect through PBC (WPS), auto, or manually. ^ This function is available when SWL(Samsung Wireless Linkset to Off. ^ You can check for equipment that supports Samsung Auto Configuration on How to set up using Samsung Auto Configuration 1. Place the AP and TV next to each other and turn them on. Because the booting times of applications differ you may have to wait for approximately 2 minutes. If the LAN cable connected the WAN port of AP during Samsung Auto Configuration, you are able to complete until internet connection test. If you do not connect, Samsung Auto Configuration will check only device connecting of AP (Not check internet). After 2 minutes, connect the Samsung Wireless LAN Adapter to the TV. When the Samsung Wireless LAN Adapter is established, the pop-up window appears. As soon as a connection is established, place the AP in parallel with the Samsung Wireless LAN Adapter giving a gap no larger than 25cm. 4. Wait until the connection is automatically established. ^ If Samsung Auto Configuration does not connect your TV to your AP, a pop-up window appears on the screen notifying you of the failure. Reset the AP, and then try again. If the connection fails again, choose one of the other connection setup methods, PBC (WPS), auto, or manual. 5. After the connection is established, locate the sharer at the desired location. ^ If the AP settings have been changed or it is the first time you use the new AP after purchase, you need to set up again beginning from Step 1. Network Setup (PBC (WPS)) How to set up using PBC (WPS) If your router has a PBC (WPS) button, follow these steps: 1. Connect your TV to Samsung Wireless LAN Adapter as described in the previous section. Turn on your TV, press the MENU button on your remote, use the ▲ or ▼ button to select Setup, and then press the ENTERE button. Use the ▲ or ▼ button to select Network in the Setup menu, and then press the ENTERE button. On the Network screen, select Network Type. Set Network Type to Wireless. Select Network Setup. The Network Setup screen appears. 2. 28 English Network Setup | Select a Network Not Selected ► | Internet Protocol Setup Auto IP Address El ■ ■ ■ Subnet Mask El ■ ■ ■ Gateway □ □ □ ■ DNS Auto DNS Server ■ ■ ■ ■ Move H Enter R Return 7. Press the Red button on your remote. 8. Press the PBC (WPS) button on your router within 2 minutes. Your TV player automatically acquires all the network setting values it needs and connects to your network. 9. After the network connection is set up, press the RETURN button to exit the Network Setup screen. Network Setup (Auto) Most wireless networks have an optional security system that requires devices that access the network to transmit an encrypted security code called an Access or Security Key. The Security Key is based on a Pass Phrase, typically a word or a series of letters and numbers of a specified length you were asked t...

Questo manuale è adatto anche per i modelli :
TV - UE32C6500U (36.16 mb)
TV - UE32C6510U (36.16 mb)
TV - UE32C6530U (36.16 mb)
TV - UE32C6540S (36.16 mb)

Scrivi la tua opinione del dispositivo



Il messaggio
Il tuo nome :
Inserire le due cifre :
capcha





categorie