.................................. ............ .............. .......... .. As an ENERGY STAR ® Partner, MEMCORP has determined that this product meets the ENERGY STAR ® guidelines for energy efficiency. – 1 – BEFORE YOU OPERATE YOUR NEW TELEVISION To get the most from your new color television, read and follow this Owner’s Manual carefully. INSTALLATION GUIDELINES • Place your TV in a room with adequate ventilation. • Keep your TV set away from sources of direct heat, such as heat registers or direct sunlight. • Do not place your TV on soft surfaces, such as rugs or blankets. • Leave enough room for air to circulate around the bottom, top and back of the set. ANTENNA CONNECTIONS • For best picture quality, we recommend that you use an outdoor antenna. Follow instructions on page 6 for proper antenna hookup. POWER CONNECTION • Your TV works on normal household current (120 volts, 60 Hz). For safety purposes, your TV’s electrical plug has one blade wider than the other. If you cannot insert the plug fully into the socket, try reversing it. In the space provided, record the serial and model numbers, located on the rear of the unit. Serial No. Model No. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with the arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to someone. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance..... FEATURES FEATURES • On-screen graphics guide you through setup features and operations • Automatic programming of channels allows easy selection of stations available in your viewing area • Sleep timer programs the TV to turn itself off at a preset time • One day timer programs the TV to come on once at a preset time • Weekly timer programs the TV to come on at a preset time every day • 24-button infrared remote control allows remote operation • VHF/UHF/CATV tuning allows reception of standard broadcasts or cable TV channels SPECIFICATIONS Power Input: AC: 120V, 60Hz DC: 12V Power Consumption: AC: 55Watts DC: 36Watts Chassis Construction: IC Solid State Picture Tube: 9” (measured diagonally) Speaker: 2.8 x 1.6 in. (70 x 40 mm) Oval, 8 ohms Tuner: 181 Channel, Freq. Synthesized Remote Control: Infrared, Direct Access 24 Key, 2 “AA” batteries Receiving Channels: VHF 2–13 UHF 14–69 CATV Mid Band 14–22 Super Band 23–36 Hyper Band 37–65 Ultra Band 66–94, 100–125 Sub Mid Band 1, 95–99 Cabinet: Monitor Style Antenna Input Impedance: 75 ohm (VHF/UHF) Coaxial Input CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT AND FULLY INSERT. – 2 – – 3 – LOCATION OF CONTROLS .... .......... .................. .............. .......... ............ ............................................ .................................. ............ .............. .......... .. 7 6 5432 1 @!09 8 7 EARPHONE JACK ( ) 8 ANTENNA HOLDER 9 AUDIO IN (put) JACK 10 VIDEO IN (put) JACK 11 DC INPUT JACK 12 VHF/UHF EXT. ANT. JACK 1 POWER SWITCH 2 CHANNEL ....(UP) BUTTON 3 CHANNEL ....(DOWN) BUTTON 4 VOLUME ....(UP) BUTTON 5 VOLUME ....(DOWN) BUTTON 6 REMOTE CONTROL SENSOR REMOTE CONTROL REMOTE CONTROL The REMOTE CONTROL unit requires two 1.5 volt “AA” size batteries. The BATTERY COMPARTMENT is located on the back of the unit. To open, press down of the lid and slide toward the bottom of the unit. Install the batteries exactly as shown by the diagram in the compartment. NOTE: If one or both of the batteries are reversed, the REMOTE CONTROL will not operate and the unit may be damaged. This REMOTE CONTROL unit uses an INFRARED WIRELESS CONTROL SYSTEM. This means that the remote commands are sent out as invisible light. For best operation, aim the REMOTE CONTROL unit directly at the REMOTE CONTROL SENSOR window on the lower center front of the TV. Please note that furniture or other solid objects can block the path of the infrared light. Dark walls might absorb the light. Do not allow strong sunshine to fall on the TV set front panel as this may affect the operation of the remote control. In this case, tune the TV away from the light or darken the room slightly. Multi Function Remote On Screen Display VOLUME CHANNEL POWER 24 Feet15° 15° CHANNEL VOLUMEMUTE MENU RECALL SLEEPTV/VIDEOPOWER Q.REV. – 4 – Remote Control Number Buttons Press to select a channel. For channels 1-9, press 0, then the channel you want to watch. For example, for channel 6, press 0, 6. For channels 100-125, press the 100 button, ...