2)Insert a blank video cassette or one you want to record over, into the unit’s cassette compartment. 3)Press [SPEED] on remote control for the unit to select the desired recording speed (SP/SLP). 4)Press [CHANNEL X XX/Y YY] on the unit until “AUX” appears on the screen. 5)Press [REC/OTR] on the unit. 6)Begin playback of the tape in the source VCR or camcorder. NOTE: • For best results during copying, use the front panel controls whenever possible. The remote control might affect the source VCR’s playback operation. 7)To stop copying, press [STOP/EJECT P PPN NN] on the unit, then stop the tape on the source VCR or camcorder. -22-EN TIMER RECORDING AUTOMATIC TIMER RECORDING You may set the unit to start and end a recording while you are away. You can set 8 programs to record on specific days, daily or weekly within a 1 year period. In the example below, the timer is being set to record: DATE: July 4th, 2005 SETTING TIME: from 7:30PM to 8:50PM CHANNEL: CH61 TAPE SPEED: SP Make sure ... • If a cable box or satellite box is connected with the unit you will be limited to record only one channel, and the channel selector on the unit must be selected to the output channel of the boxes CH 3 or CH 4 and then the actual channel to be recorded must be selected on the boxes. • Clock must be set to the correct time and date before setting the timer. • The unit must be turned on to program it. • Insert a cassette tape with its erase-prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.) • The channel you want to record is properly set in advance. (Refer to page 12.) Avoid overlap of programs ... There is a chance that a program will not be recorded, when programs overlap; • The program with an earlier start has priority. • Once the earliest program finishes, the overlapping programs will begin recording in sequence. • When the starting time is the same, the program set on the highest position in the program list has priority. • The illustration below demonstrates the sequence of recordings. Program 1 10:00AM -11:00AM Program 2 9:00AM -10:00AM Program 3 9:30AM -12:00PM Recording Sequence Program 1 10:00AM-11:00AM Program 2 9:00AM-10:00AM Program 3 9:30AM-12:00PM 9:00AM 10:00AM 11:00AM 12:00PM *Recording period is SHADED 1 Select “TIMER PROGRAMMING” Press [MENU]. Confirm “TIMER PROGRAM-B MING” is pointed by pressing [PLAY/K KK], then press [F.FWD/B BB]. • If you have not yet set the clock, “MANUAL CLOCK SET” – M E N U – TIMER PROGRAMMING PICTURE CONTROL SETTING CLOCK CHANNEL SET UP USER’S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH appears. If so, follow steps 3 to 8 on page 13 and 14. Then set the timer recording. 2 Select your desired program position (1 to 8) Press [PLAY/KK] or [STOP/LL] to select the desired program position, then press [F.FWD/ BB]. – TIMER PROGRAMMING – CH DATE BEGIN END - --/- --- --:- --:- --- - --/- --- --:- --:- --- - --/- --- --:- --:- --- B -/- --- --:- --:- --- - --/- --- --:- --:- --- - --/- --- --:- --:- --- - --/- --- --:- --:- --- - --/- --- --:- --:- --- – TIMER PROGRAMMING – CH DATE BEGIN END - --/- --- --:- --:- --- - --/- --- --:- --:- --- -/- --- --:- --:- --- 61 -- --:- --:- --- -/- --- --:- --:- --- - --/- --- --:- --:- --- - --/- --- --:- --:- --- - --/- --- --:- --:- --- 3 Set the channel number Press [PLAY/K KK] or [STOP/L LL] until the desired channel number appears (Example: CH61), then press [F.FWD/ B BB]. NOTE: • If the unit is connected to a cable - 23 - 23- 23 - -- box or satellite box, the unit must be on CH3 or CH4, then the channel to be recorded is selected on the cable box or satellite box. 4 Select once, every day or weekly recording For once recording : Press [PLAY/K KK] until the desired date appears. (Example: “7/04” for July 4th) Then press [F.FWD/ B BB]. For every day recording : To record a TV program at the same time on the same channel every day. (Example: Monday through Sunday) Press [STOP/L LL] until “EVRY DAY” appears, then press [F.FWD/ B BB]. For weekly recording : To record a TV program at the same time on the same channel every week. (Example: every Monday) Press [STOP/L LL] until “EVRY” and your desired day of the week appear together, then press [F.FWD/B BB]. 5 Set beginning hour Press [PLAY/K KK] or [STOP/L LL] until the desired hour appears. (Example: “ 7, PM” for 7:30PM) Then press [F.FWD/B BB]. 6 Set beginning minute Press [PLAY/K KK] or [STOP/L LL] until the desired minute appears. (Example: “30” for 7:30PM) Then press [F.FWD/B BB]. 7 Set end hour Press [PLAY/K KK] or [STOP/L LL] until the desired hour appears. (Example: “8, PM” for 8:50PM) Then press [F.FWD/B BB]. – TIMER PROGRAMMING – CH DATE BEGIN END - --/- --- --:- --:- --- - --/- - -/- - -- --:- --:- --- - --- --:- --:- --- B 7/04 -:- --:- --- - --- --:- --:- --- - --/- --- --:- --:- --- - --/- --- --:- --:- --- - --/- --- --:- --:- --- – TIMER PROGRAMMING – CH DATE BEGIN END - --/- --- --:...