valutazioni - 1, GPA: 5
(
)
)
|
Facilità d'uso
It is recommended that you set the Speed to the SP mode on the recording VCR for best results. 1 Press INPUT to select AUDIO/VIDEO input position. “LINE” will appear on the screen. 2 Press PLAY on the playback VCR or camcorder. 3 Press REC to start recording. 4 Press STOP after duplicating a video tape. 5 Preparation: • Load a cassette tape with the erase prevention tab intact. • Load a previously recorded tape into the playback VCR or Camcorder. To VIDEO IN Note: Unauthorized recording of copyrighted television programs, films, video cassettes and other materials may infringe the rights of copyright owners and be contrary to copyright laws. Connection with second video recorder LINE Illustration of MV13Q41 Illustration of MV13Q41 36 5S20101A [E]p32-36 36 12/16/04, 4:28 PM OthersOthers Reception disturbances Most types of television interference can be remedied by adjusting the height and position of the VHF/UHF antenna. Outdoor antennas are recommended for best results. The most common types of television interference are shown below. If one of these symptoms appear when the unit is connected to a Cable TV system, the disturbance may be caused by the local Cable TV company broadcast. Others GHOSTS Ghosts are caused by the television signal following two paths. One is the direct path and the other is reflected by tall buildings, hills or other large objects. Changing the direction or position of the antenna may improve the reception. IGNITION Black spots or horizontal streaks may appear, the picture may flutter or drift. Usually caused by interference from automobile ignition systems, neon lamps or AC powered tools and appliances such as drills or hair dryers. SNOW If the unit is located far from the TV station, in a fringe reception area where the signal is weak, small dots may appear in the picture. If the signal is extremely weak, the installation of a larger external antenna may be necessary. RADIO FREQUENCY INTERFERENCE (RFI) Caused by two-way radios, this type of interference produces moving ripples or diagonal streaks in the picture. Some cases may cause a loss of contrast in the picture. Changing the direction and position of the antenna or installing an RFI filter may improve the picture. PICTURE SIZE VARIATION A slight picture size variation is normal when you adjust the CONTRAST or BRIGHTNESS settings. CARE AND MAINTENANCE To prevent fire or shock hazard, disconnect the unit from the power source before cleaning. The finish on the cabinet may be cleaned with mild soap and a soft, damp cloth and cared for as other furniture. Use caution when cleaning or wiping the plastic parts. 37 5S20101A [E]p37-40 37 12/16/04, 4:28 PM Others Others Troubleshooting Check the following guide for the possible cause of a problem before contacting service. SYMPTOMS CAUSE POSSIBLE SOLUTIONS PAGE Try another channel. Check picture control adjustments. Check for source of reception disturbance. Check CABLE connection or VHF/UHF antenna, reposition or rotate antenna. Try another channel. Check picture control adjustments. Check for source of reception disturbance. Check CABLE connection or VHF/UHF antenna, reposition or rotate antenna. Try another channel. Check CABLE connection or VHF/UHF antenna, reposition or rotate antenna. Try another channel. Check all CABLE connections. Set the selection to the CABLE position. Contact your Cable TV company. Make sure selection is in the appropriate position. Check UHF antenna. Try another channel. Check CABLE connection or VHF/UHF antenna, reposition or rotate antenna. Check for source of reception disturbance. Check the MUTE button has not been pressed. Tune new channel. Set Sleep Timer to “0”. Try another channel. Check CABLE connection of VHF/UHF antenna, reposition or rotate antenna. Press the CLOSED CAPTION button to turn on the closed caption. TV station experiencing problems. Picture control is not adjusted. Possible local interference. Antenna (CABLE) connector is not connected or possible local interference. TV station experiencing problems. Picture control is not adjusted. Possible local interference. Antenna (CABLE) connector is not connected or possible local interference. TV station experiencing problems. Antenna (CABLE) connector is not connected or possible local interference. Cable TV channel is scrambled. CABLE connector is not connected. TV/CABLE selection is set to the TV position. Cable TV service interrupted. TV/CABLE selection is not set to the appropriate position. UHF antenna is not connected. TV station experiencing problems. Antenna (CABLE) connector is not connected or possible local interference. Possible local interference. The MUTE button is depressed. TV station stopped broadcasting. Sleep timer is set. TV station experiencing problems or program tuned is not closed captions. TV signal is weak. The CLOSED CAPTION button is not depressed. The AC power cord is not connected. Cassette is not inserted. The TIMER REC button is depressed. No power. Closed...