|
Facilità d'uso
CH. 321 654 987 0 POWER STATUS/EXIT TRACKINGREC/OTR SPEED MEMORY ALT. CH PAUSE/STILL MUTE F.FWDREW PLAY STOP LEEP/WAKE UP MENU CLEAR Press the PLAY/s button or the STOP/t button to select a ONCE, DAILY, OR WEEKLY recording. Then, press the F.FWD/B button. . ONCE: The TV/VCR will record a TV program on any day you choose, up to 12 months away. . DAILY: The TV/VCR will record every day from Monday to Friday – starting at the same time and recording the same channel for the same length of time. . WEEKLY: The TV/VCR will record the same channel on the same day, at the same time, and for the same length of time every week. DAILY PROGRAM (MON-FRI) Daily PROGRAM -1 2 3 4 5 6 7 8Recording (example) SELECT PROGRAM NUMBER TO END PRESS EXIT • With ShowGuard, you don’t have to worry about losing your timer recordings. If the power fails, programmed timer recordings will be restored when the clock is reset. (The clock will reset itself automatically if you are using the AUTO CLOCK feature. Details are on pages 14-17. If you are not using the AUTO CLOCK feature, reset the clock manually. Details are on pages 12-13.) The timer recording will not occur only if the timer recording was scheduled to take place during the power failure. • You cannot set a timer recording if DEFEAT RECORDING is set to ON. Details are on page 36. Timer Recording (cont’d) 33 4 Use the Number buttons (1-8) to select a position in which to store the timer recording. Flashing numbers indicate an open position (one in which a timer recording has not 4-7 been stored yet). NOTE: If you select a number that already has been used to store a timer recording, PREVIOUSLY SET PROGRAM will appear on the screen for a few seconds. Then information about the program in that position will appear on the screen. If this happens, press the STATUS/EXIT button. Then use the Number buttons to select another position. 5 Use the Number buttons to enter the channel of the TV program you want to record. . If you are recording from line input, press 0, 0. A/V IN will appear on the screen. . If you are recording using a Cable Box, enter the Cable Box output channel (03 or 04). Be sure to select the channel of the TV program at the Cable Box and leave the Cable Box on for the timer recording. ONE TIME PROGRAM PROGRAM 1 CHANNEL – – – TO CORRECT PRESS CLEAR TO END PRESS EXIT 6 Press two Number buttons for the hour(s) you want the recording to begin. Press two Number buttons for the minute(s) you want the recording to begin. Press 1 for AM or 2 for PM. For example, for 9:30 PM, press 09, 30, 2. ONE TIME PROGRAM PROGRAM 1 CHANNEL 10 TIME ON – – : – – TO CORRECT PRESS CLEAR TO END PRESS EXIT 7 Follow the instructions in step 6 to set the recording’s stop time. (AM or PM will be set automatically.) ONE TIME PROGRAM PROGRAM 1 CHANNEL 10 TIME ON 09:30 PM TIME OFF – – : – – TO CORRECT PRESS CLEAR TO END PRESS EXIT Instructions continue on page 34. VOL. CH. 321 654 987 0 POWER STATUS/EXIT TRACKINGREC/OTR SPEED MEMORY ALT. CH PAUSE/STILL MUTE F.FWDREW PLAY STOP SLEEP/WAKE UP MENU CLEAR Helpful Hints • If the numbers entered do not match the TV/VCR’s clock or calendar, the entry will be rejected and a question mark will appear on the screen. • To make corrections while you are programming a timer recording, press the CLEAR button until the cursor is flashing on the item you want to change. Then enter the correct information. 34 Timer Recording (cont’d) 8 Press the Number 1 button to record in SP speed or press the Number 2 button to record in SLP speed. Details about tape speed are on page 29. You cannot use the SPEED button at this time. ONE TIME PROGRAM PROGRAM 1 CHANNEL 10 TIME ON 09:30 PM TIME OFF 11:00 PM REC SPEED SLP SP=1 SLP=2 TO CORRECT PRESS CLEAR TO END PRESS EXIT 9 Press two Number buttons for the month and two Number buttons for the day you want the program to record. For example, for July 10, 2000, press 07, 10. The day of the week and the year will be displayed automatically. (You cannot program the TV/VCR to record more than one year in advance.) ONE TIME PROGRAM PROGRAM 1 CHANNEL 10 TIME ON 09:30 PM TIME OFF 11:00 PM REC SPEED SLP START DATE 07/10/2000 MONDAY TO CORRECT PRESS CLEAR TO END PRESS EXIT 10 Press the STATUS/EXIT button. PROGRAM WAS COMPLETED PLEASE TURN OFF FOR TIMER RECORDING will appear on the screen. . If there is not a tape in the TV/VCR, PLEASE INSERT CASSETTE also appears on the screen. . If there is a tape without a record tab in the TV/VCR, PLEASE REMOVE CASSETTE also appears on the screen. If this happens, insert a different tape. l If PROGRAM NOT COMPLETED appears, start again at step 1. 11 Press the POWER button to turn off the TV/VCR power. The RECORD light will flash slowly. If you forget to turn off the TV/VCR, PLEASE TURN OFF FOR TIMER RECORDING appears on the TV/VCR screen two minutes before a timer recording is scheduled to begin. 11 10 8 9 VOL. CH. 321 654 987 0 POWER STATUS/EXIT TRACKINGREC/OTR SPEED MEMORY ALT. CH PAUSE/STILL MUTE F.FWDREW...
Questo manuale è adatto anche per i modelli :TV - CCB130CN (765.67 kb)
VCR / lettori video - CCB130CN (765.63 kb)